Domestic Hot Water (Dhw) Mode Operation - Samsung AE090JNYDEH User Manual

Domestic Hot Water (DHW) mode operation

You can adjust temperature of hot water tank by providing hot water.
Press the Mode button in DHW.
16 16
English English
• Select (economic),
(forced) by pressing the Mode button in DHW
section.
NOTE
• To operate hot water mode, you need to set the hot
water function '1 or 2' in the field specification setting
mode (#3011) of wired remote controller and connect
the temperature sensor of hot water tank.
• When cool/heat mode and DHW mode are selected at
the same time, the heat/cool mode and DHW mode
will operate alternately.
• (power) for DHW mode cannot be used when the
Booster heater is not in use.
• If you want to enjoy a leisurely bath or need a lot of
warm water urgently, select the Forced DHW mode.
When this mode is enabled, it is assured that the
full capacity of the heat pump is only delivered for
domestic water heating.
CAUTION
• By default field setting value option, this function will
not be turned off automatically.
• If you want a Forced DHW function for a certain
amount of duration time, change the field setting
value of remote controller.
(standard), and (power),