Samsung CLP-300 Remanufacturing Instructions page 5

11. UPDATE: Do not attempt to remove the complete OEM chip as it is fused into the cartridge.
You will on the other hand, need to remove the OEM contact by using a small flat head screw driver and prying them off.
12. Peel off the strip to expose the adhesive on the reverse
side of the new hardware replacement chip. Install the new
chip in the small space shown. Remanufacturing complete.
© 2010 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners. Product brand names mentioned are intended to show compatibility only.
UniNet Imaging does not warrant downloaded information. Unauthorized sale, reproduction or distribution of this article is prohibited. For additional support, please contact techsupport@uninetimaging.com
SAMSUNG CLP-300 • TONER CARTRIDGE REMANUFACTURING INSTRUCTIONS
REPLACING THE CHIP
NOTE: Starter cartridges do not have a chip, our UniNet
new hardware chip will fit in the empty space.
www.uninetimaging.com