Lsi 1068 Sas Configuration Utility - Acer Altos G540 Series User Manual

116

LSI 1068 SAS Configuration Utility

This section explains how to create a RAID 1 volume when the LSI 1068
SAS controller board is installed.
To initialize the LSI Logic Config Utility:
1 Turn on the server and the monitor.
If the server is already turned on, close all open applications, then
restart the server.
2 During POST, press Ctrl-C on the SAS BIOS prompt.
To load the factory default RAID setting:
1 On the LSI Logic Config Utility, press Alt-N to display Global
Properties.
2 Select Restore Defaults, then press Enter.
3 Press Esc, then select Save changes then exit this menu.
4 Select SAS1068, then press Enter.
5 Select Advanced Adapter Properties, then press Enter.
6 Select Restore Defaults, then press Enter.
7 Press Esc twice, then select Save changes then exit this menu.
To create a RAID 1 volume with a hot spare disk:
1 On the LSI Logic Config Utility, click SAS1068, then press Enter.
2 Select RAID Properties, then press Enter.
3 Select Create IM Volume, then press Enter.
4 Move the cursor to the RAID Disk column.
5 Press the space bar to change the setting from No to Yes.
The Drive Status will be marked as Primary.
6 Move the cursor to another disk.
7 Press the space bar to change the setting from No to Yes.
The Drive Status will be marked as Secondary.
Appendix A: Server management tools