Related Manuals for Marcy ME-708
Summary of Contents for Marcy ME-708
- Page 1 ME-708 UPRIGHT BIKE USER MANUAL Distributed By: Pure-Tec Limited www.puretecfitness.com www.puretecfitness.com...
-
Page 2: Table Of Contents
CONTENTS Important Safety Information Weight Limit Capacities Hardware Parts List Pre Assembly Check List 6 - 11 Assembly Instructions 12-13 Computer Instructions 14-15 Exercise Instructions 16-17 Exploded Diagram 18-19 Parts List Additional Information Warranty Information www.puretecfitness.com... -
Page 3: Important Safety Information
IMPORTANT SAFETY INFORMATION READ ALL INSTRUCTIONS BEFORE USING THIS OWNER’S MANUAL CONTAINS ASSEMBLY, OPERATION, MAINTENANCE AND SAFETY INFORMATION. IN THE INTEREST OF SAFETY, PLEASE MAKE CERTAIN THAT YOU READ AND UNDERSTAND ALL THE INFORMATION BELOW. 1. This Bike is intended for class H (H=Domestic) use only. It is not designed for commercial use. -
Page 4: Hardware Packing List
HARDWARE PACKING LIST Q’ty Description DRAWING Washer Φ17*Φ8 Carriage Bolt M8*65 Curved Washer Φ8 Acorn Nut M8 Allen Bolt M8*16 Flat WasherΦ25.4*Φ8 Screw M8*30 Allen KeyL6 Crossing Wrench www.puretecfitness.com... -
Page 5: Pre Assembly Check List
PRE-ASSEMBLY CHECK LIST Q’TY PART NO. DESCRIPTION Main frame Front support Seat support Meter 9/10 Pedal ( L/R ) Seat Handlebar Front stabilizer Rear stabilizer www.puretecfitness.com... -
Page 6: Assembly Instruction
ASSEMBLY INSTRUCTION STEP 1 Attach the front stabilizer (02) to the main frame (01), Secure using two curved washers (16), two domed nuts (17) and allen bolts (15). Attach the rear stabilizer (03) to the main frame (01), Secure using two allen screws (18), two washers (19) from bottom. - Page 7 STEP 2 Attach the front post (04) to the main frame (01). Connect the middle sensor wire (21) from the bottom of front post to the lower sensor wire (22) from the main fame. Pull the tension connector from the upper tension cable (20) and slide in between the opening on the connector holder on the lower tension cable (23).
- Page 8 HOW TO CONNECT TENSION CONNECTOR Slide the Cable wire from the extension sensor wire Connector in between the opening on the wire holder on sensor wire Connector. Pull the extension sensor wire Connector backward and slide the wire through the slot on the bracket.
- Page 9 STEP 3 Attach the handlebar (05) to front of the front post (04), secure using two allen screw (26), Insert the lower pulse (30) through grommet (29) on front post (04) and pull the middle sensor wire (21) out of front post (04). Connect lower pulse wire (30) with hand pulse wire (31) from computer (06).
- Page 10 STEP 4 Remove the three washers (12), three lock washers (13), and three nylon nuts (14) from the seat (08). Attach the seat to the seat post (07). Secure it with three washers (12), three lock washers (13), and three nylon nuts (14). Insert the seat post into the opening on main frame (01).
- Page 11 STEP 5 Attach the left and right pedal straps to the left and right pedals (9/10). Attach the left and right pedals (9/10) to the left and right crank arms. Note: The pedals and crank arms are marked with "R" and "L". The left pedal (L) should be threaded on clockwise and the right pedal (R) should be threaded on counter-clockwise.
-
Page 12: Computer Instructions
COMPUTER INSTRUCTIONS FUNCTIONAL BUTTON: MODE/RESET – Push down to select functions. – Push down to reset time、 distance、 calories ODO and pulse for 4 seconds. FUNCTIONS AND OPERATIONS 1. SCAN: Press MODE button until▼ “ ” appears at SCAN position, monitor will rotate through the following functions: time、... - Page 13 SPECIFICATIONS: AUTO SCAN Every 4 seconds 00:00’~99:59’ TIME FUNCTION CURRENT The maximum signal can be SPEED pickup is 99.9KM/H TRIP 0.00~99.99KM or 0.00~9999KM DISTANCE CALORIES 0.1~999.9kCAL 0.1~999.9KM or 1 ~ 9999KM PULSE 40~206BPM RATE 2pcs of SIZE –AAA or UM –3 BATTERY TYPE OPERATING 0°C ~ +40°C...
-
Page 14: Exercise Instructions
EXERCISE INSTRUCTIONS Using your UPRIGHT BIKE will provide you with several benefits, it will improve your physical fitness, tone muscle and in conjunction with a calorie controlled diet help you lose weight. 1. The Warm Up Phase This stage helps get the blood flowing around the body and the muscles working properly. It will also reduce the risk of cramp and muscle injury. - Page 15 3. The Cool Down Phase This stage is to let your Cardio-vascular System and muscles wind down. This is a repeat of the warm up exercise e.g. reduce your tempo, continue for approximately 5 minutes. The stretching exercises should now be repeated, again remembering not to force or jerk your muscles into the stretch.
-
Page 16: Exploded Diagram
EXPLODED DIAGRAM www.puretecfitness.com... - Page 17 www.puretecfitness.com...
-
Page 18: Parts List
PARTS LIST Q’TY PART NO. DESCRIPTION Main frame Front stabilizer Rear stabilizer Front post Handle Computer Seat post Seat Left pedal Right pedal Lock knob WasherΦ17*Φ8 Lock washer Nylon nut M8 Carriage bolt M8*65 Curved washerΦ8 Domed nut M8 Allen bolt M8*16 Flat washerΦ25.4*Φ8 Tension knob w/ Upper tension cable Middle computer sensor wire... - Page 19 PARTS LIST Q’TY PART NO. DESCRIPTION Little belt pulley Bearing Bowl shaped spacer Flange nut BB parts Magnet assembly Allen bolt M8*85 Spacer Bushing Hex head screw M6*25 Nut M6 Spring for magnet assembly Hex head screw M8*45 Nut M8 Spring for idler Spacer Allen screw M8*20...
-
Page 20: Additional Information
ADDITIONAL INFORMATION Packaging Disposal Government guidelines ask that we reduce the amount of waste material disposed of in land fill sites. We therefore ask that you dispose of all packaging waste responsibly at public recycling centres. End of Life Disposal We at Pure-Tec Limited hope you have many years of enjoyable use from your Bike. -
Page 21: Www.puretecfitness.com
LIMITED WARRANTY Pure-Tec warrants this product to be free from defects in workmanship and material, under normal use and service conditions. Please refer to www.puretecfitness.com for warranty terms. This warranty extends only to the original purchaser and is valid for home use only. Pure-Tec’s obligation under this Warranty is limited to replacing damaged or faulty parts at Pure-Tec’s option.
Need help?
Do you have a question about the ME-708 and is the answer not in the manual?
Questions and answers