RECORDS
6.5.3 Oscillography
ACTUAL VALUES RECORDS OSCILLOGRAPHY
OSCILLOGRAPHY
6
This menu allows the user to view the number of triggers involved and number of oscillography traces available. The cycles
per record value is calculated to account for the fixed amount of data storage for oscillography. See the Oscillography
section of chapter 5 for details.
A trigger can be forced here at any time by setting "Yes" to the FORCE TRIGGER? command. See the
menu for information on clearing the oscillography records.
RECORDS
6.5.4 Data logger
ACTUAL VALUES RECORDS DATA LOGGER
DATA LOGGER
The
OLDEST SAMPLE TIME
full, at which time it starts counting at the defined sampling rate.
6-26
Figure 6-5: Event records viewed in EnerVista software
FORCE TRIGGER?
No
NUMBER OF TRIGGERS:
0
AVAILABLE RECORDS:
0
CYCLES PER RECORD:
0
LAST CLEARED DATE:
2000/07/14 15:40:16
OLDEST SAMPLE TIME:
2000/01/14 13:45:51
NEWEST SAMPLE TIME:
2000/01/14 15:21:19
represents the time at which the oldest available samples were taken. It is static until the log gets
CHAPTER 6: ACTUAL VALUES
Range: No, Yes
C60 BREAKER PROTECTION SYSTEM – INSTRUCTION MANUAL
COMMANDS CLEAR