Advertisement
Dimensions
For
More
Information,
Models (deep-frame): HIP-205BA5,HIP-200BA5, HIP-195BA5,
Please
Contact
Authorized Representatives
Dimensions in mm
at:
www.sanyo.com/industrial/sol
ar/representatives.cfm
Front
Note: A module should be installed on a support structure in
accordance with the following:
Use four (4) symmetrical mounting points within set range A.
MAINTAINENCE
Some maintenance is recommended to
maintain optimal output performance of
the solar modules. If the module surface
becomes dirty, it may reduce output
power. It is recommended to clean the
surface of the module with water and a
soft cloth or sponge. A mild non-abrasive
detergent may be applied for persistent
dirt. It is also recommended to inspect
the module's electrical and mechanical
connections annually.
If you need electrical and mechanical
inspection or maintenance, it is
recommended to have an authorized
professional carry out the inspection or
maintenance to avoid the hazard of
electric shock and/or injury.
SANYO
HIP-190BA5, HIP-186BA5, HIP-180BA5
Mount Locations
Side
Figure 3.2 Deep-Frame Model
Dimensions
The return of any modules will not be
accepted by SANYO unless prior
written authorization has been given by
SANYO.
As part of our policy of continuous
improvement SANYO reserves the right
to change product specifications at any
time without prior notice.
Ground (1 place)
Junction Box
Label
negative (－)
positive ( + )
78cm (30.7in)
63cm (24.8in)
Connector (MC
TM
Plug)
Backside
Section A-A'
5
For further information, please
contact:
Advertisement
