Page 4
ALARM - minor/major alarm 10/100 Ethernet POWER - device is powered on the installa on site fe-0/0/0 STATUS - device is func oning DHCP Client HA - device is part of chassis clustering Dell PowerConnect J-Series J-SRX100S/SU Services Gateway Getting Started Guide...
1 .3 Checking the Dell PowerConnect J-Series 1.3.1 Any Items Missing? J-SRX100S/SU Services Gateway Package If any items are missing from your package, contact Dell Contents customer support at www .support .dell .com. Before setting up your Dell PowerConnect J-Series...
Page 6
2 Setting Up Your Network This chapter provides preconfiguration and configuration instructions for connecting your Dell PowerConnect J-Series J-SRX100S/SU Services Gateway. Review this chapter to set up your services gateway. Section 2 Contents 2 .1 Recording Configuration Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 2 .2 Connecting the Device .
Threat Management (UTM)/Intrusion Detection and Prevention (IDP) licenses on the device. Serial Number Record the serial number found on the bottom of the chassis of your Dell PowerConnect J-Series J-SRX100S/SU Services Gateway. Dell PowerConnect J-Series J-SRX100S/SU Services Gateway Getting Started Guide...
This section covers the following tasks: 2 .2 .1 Connecting the Power Cable to the Device 2 .2 .2 Connecting the Management Device 2 .2 .3 Connecting to Your Internet Service Provider Dell PowerConnect J-Series J-SRX100S/SU Services Gateway Getting Started Guide...
Page 9
We recommend using a surge protector. Connect the management device to the services gateway using Note the following indications (see “1 .1 Dell PowerConnect an RJ-45 cable (Ethernet cable) from any one of the fe-0/0/1 J-Series J-SRX100S/SU Services Gateway Front Panel”): through fe-0/0/7 ports on the front panel to the Ethernet port - POWER LED (green): The device is receiving power.
Now you can browse the Internet from your management Connect the fe-0/0/0 port on the Dell PowerConnect J-Series device. For example, type www .dell .com in your browser. J-SRX100S/SU Services Gateway to your ISP or Internet (see “Figure 1: Connecting the Management Device to the Services Gateway”).
4 . Click Log In. The first time you log in, the J-Web Initial Setup For NAT Rule page appears. trust untrust source NAT to untrust zone interface Dell PowerConnect J-Series J-SRX100S/SU Services Gateway Getting Started Guide...
Page 12
Enter the hostname and root password. You can also configure DNS server, time zone, and so on, on this page. 6 . Click Apply. Click Commit Options on the top right corner and click Commit. Dell PowerConnect J-Series J-SRX100S/SU Services Gateway Getting Started Guide...
2 .7 .5 Creating a Default Route to the WAN Interface Access the Internet from your management device. For example, type www .dell .com in your browser. This 2 .7 .6 Applying the Basic Configuration Settings connectivity ensures that you can pass traffic through the 2.7.1 Setting the System Hostname, Domain Name...
Page 14
Select the set time options in Set time. Click Edit at the top right corner of the page, and then select 4 . Click OK. your required time zone from the list. Dell PowerConnect J-Series J-SRX100S/SU Services Gateway Getting Started Guide...
Page 15
Select Enable address configuration and then select the Click OK. IPv4 Address check box . NOTE: The IPv4 Address check box must be selected before the Add button is automatically enabled. Dell PowerConnect J-Series J-SRX100S/SU Services Gateway Getting Started Guide...
Page 16
NOTE: While adding the next hop, the field is separated by tabs instead of dots. 6 . Click Add and enter the IP address and subnet mask provided by your ISP. Click OK. Dell PowerConnect J-Series J-SRX100S/SU Services Gateway Getting Started Guide...
Ping Host. configuration to create a candidate configuration. The changes Enter www .dell .com in Remote Host and click Start. If your you make to the candidate configuration are visible through ping is successful go to Step 3, otherwise go to Step 4.
Page 18
Select inet .0 from the Route Table list and then click Generate Report. c. Save the report on your local disk. 5 . Contact Dell customer support at www .support .dell .com. Dell PowerConnect J-Series J-SRX100S/SU Services Gateway Getting Started Guide...
(fe-0/0/1 through fe-0/0/7) on services gateway to a zone. In the Interfaces in this zone field, move fe-0/0/2 from the Available list to the Selected list. Dell PowerConnect J-Series J-SRX100S/SU Services Gateway Getting Started Guide...
Page 21
Clear the Ethernet switching check box and select the Selected and click OK. IPv4 Address check box. d. Select the IPv4 Address check box. e. Click Add and enter the IP address. Click OK. Dell PowerConnect J-Series J-SRX100S/SU Services Gateway Getting Started Guide...
To perform this, follow the steps mentioned in “3 .3 Configuring Security Policies;” however, you need select DMZ from the list for From Zone and untrust from the list for To Zone. Dell PowerConnect J-Series J-SRX100S/SU Services Gateway Getting Started Guide...
System Properties > Management Access . The Management Access Configuration page appears. Click Edit. Click the Services tab. 4 . In Services, select the check box for the service that you want to enable. Dell PowerConnect J-Series J-SRX100S/SU Services Gateway Getting Started Guide...
Click the security zone that you want to modify (for example, untrust). In the Main tab, ensure fe-0/0/0 interface is in the Selected column. 4 . Click the Host inbound traffic – Zone tab. Dell PowerConnect J-Series J-SRX100S/SU Services Gateway Getting Started Guide...
This chapter provides the Unified Threat Management (UTM) and Intrusion Detection and Prevention (IDP) policy configuration and installation instructions for accessing your Dell PowerConnect J-Series J-SRX100S/SU Services Gateway. NOTE: If you have not purchased the UTM or IDP licenses, do not proceed with the instructions provided in this chapter.
Page 26
In the Feature Summary, check that all the licenses are J-SRX100S/SU Services Gateway configuration instructions for installed. using a UTM policy to secure the network: 4 .3 .1 Enabling Anti-Virus 4 .3 .2 Enabling Web Filtering Dell PowerConnect J-Series J-SRX100S/SU Services Gateway Getting Started Guide...
Page 27
NOTE: You can either create a new UTM policy or use an existing UTM policy (if any exits) to add Anti-Virus to it. If you want to create a new anti-virus profile, see “4 .3 .1 .3 Creating an Anti-Virus Profile .” Dell PowerConnect J-Series J-SRX100S/SU Services Gateway Getting Started Guide...
Page 28
Click Edit to edit an existing policy. Click Add for a new anti-virus profile. Click the Application Services tab. 4 . In UTM Policy, select custom-utm-policy from the list. Click OK. Dell PowerConnect J-Series J-SRX100S/SU Services Gateway Getting Started Guide...
Page 29
4 .3 .2 .1 Applying a Web Filtering Profile to a UTM Policy 4 .3 .2 .2 Applying a UTM Policy to a Firewall Policy 4 .3 .2 .3 Creating a Web Filtering Profile Dell PowerConnect J-Series J-SRX100S/SU Services Gateway Getting Started Guide...
Page 30
NOTE: If you want to create a new Web filtering profile, 6 . Click Commit Options on the top right corner of the page see “4 .3 .2 .3 Creating a Web Filtering Profile .” and click Commit. Dell PowerConnect J-Series J-SRX100S/SU Services Gateway Getting Started Guide...
Page 31
4 .3 .3 .1 Applying an Anti-Spam Profile to a UTM Policy 4 .3 .3 .2 Applying a UTM Policy to a Firewall Policy 4 .3 .3 .3 Creating an Anti-Spam Profile Dell PowerConnect J-Series J-SRX100S/SU Services Gateway Getting Started Guide...
Page 32
NOTE: If the configuration delivery status is fail, click Details for more information. If you want to create a new anti-spam profile, see “4 .3 .3 .3 Creating an Anti-Spam Profile .” Dell PowerConnect J-Series J-SRX100S/SU Services Gateway Getting Started Guide...
Page 33
To verify the UTM configuration settings, perform the following tasks: Enter the profile name. 4 .3 .5 .1 Verifying an Anti-Virus Configuration 4 .3 .5 .2 Verifying a Web Filtering Configuration 4 .3 .5 .3 Verifying an Anti-Spam Configuration Dell PowerConnect J-Series J-SRX100S/SU Services Gateway Getting Started Guide...
Page 34
NOTE: Click the plus sign (+) to view the UTM anti-virus NOTE: If you want to clear the data, click Clear Web statistics. If you want to clear the data, click Filtering Statistics. Clear Anti-Virus Statistics. Dell PowerConnect J-Series J-SRX100S/SU Services Gateway Getting Started Guide...
Page 35
To download and install the latest security package: Click the Configure tab and choose Security > IDP > Signature Update. Click the Download tab and select Latest Version from the list. Dell PowerConnect J-Series J-SRX100S/SU Services Gateway Getting Started Guide...
Page 36
Check Status Click OK. The installation successful message appears. > Download Status. 8 . Click OK. 4 . Click OK. Click the Install tab in the Security IDP Signature Configuration page. Dell PowerConnect J-Series J-SRX100S/SU Services Gateway Getting Started Guide...
Page 37
Policies. 4.4.3 Loading the Policy Templates File Click the Template tab and select Download Template. To view all the pre-defined IDP templates available on the Dell PowerConnect J-Series J-SRX100S/SU Services Gateway, you must load the policy templates file. To load the policy templates file: Click the Configure tab and choose Security >...
Page 38
Click the Configure tab and choose Security > Policy > IDP FW Policies. Policies. Click Edit to edit a policy. Click the Recommended policy link, and then click Activate at the top right corner of the page. Dell PowerConnect J-Series J-SRX100S/SU Services Gateway Getting Started Guide...
Page 39
Choose Security > IDP > Status. 4 . Click OK. 4.4.6 Applying the IDP Configuration Settings To save the IDP configuration settings, select Commit Options at the top right corner of the page and click Commit. Dell PowerConnect J-Series J-SRX100S/SU Services Gateway Getting Started Guide...
• Forced shutdown—Press the Power button and hold it for 10 seconds. The device immediately shuts down. Press the Power button again to power on the device. NOTE: You can reboot or halt the system in J-Web by selecting Maintain > Reboot. Dell PowerConnect J-Series J-SRX100S/SU Services Gateway Getting Started Guide...
6 .1 Customer Support If there are any technical issues while setting up Dell PowerConnect J-Series J-SRX100S/SU Services Gateway, contact Dell customer support www .support .dell .com. 6 .2 Technical Documentation For Technical documentation, refer to www .support .dell .com/manuals .
Page 44
Information in this document is subject to change without notice. All rights reserved. Reproduction of these materials in any manner whatsoever without the written permission of Juniper Networks is strictly forbidden. Trademarks used in this text: Dell™, the DELL™ logo, and PowerConnect™ are trademarks of Dell Inc. Juniper Networks® and G33® are registered trademarks of Juniper Networks, Inc. in the United States and other countries.