Qfp Adaptor - HP H8/3003 User Manual

QFP adaptor

PGA adaptor
Caution
Caution
The H8/3003 emulator is provided without any QFP adaptor or PGA
adaptor with QFP probe. To emulate each processor with your target
system, you need to purchase appropriate QFP adaptor or PGA adaptor
with QFP probe.
To emulate each processor with your target system, you need to
purchase appropriate adaptor listed in Table 1-1. The QFP adaptor
allows you to connect the emulation probe to your target system using
the QFP socket/adaptor provided with the QFP adaptor.
To emulate each processor with your target system, you need to use HP
64784E PGA adaptor as shown in Figure 3-2. The PGA adaptor allows
you to connect the emulation probe to QFP socket/adapter on your
target system through the QFP probe listed in Table 1-1.
Do not apply strong force to QFP probe, as that might damage the
QFP probe.
To emulate H8/3001 processor with mode 3/4 or H8/3004/05 processor
with mode 3, you must use HP 64784-66509 board as shown in Figure
3-3 and 3-4. Connecting the emulator and your target system without
this board causes serious damage, when you emulate in these cases.
Always detach HP 64784-66509 except you emulate H8/3001
processor with mode 3/4 or H8/3004/5 with mode 3.
3-3 In-Circuit Emulation