JUMO IMAGO 500 Manual

JUMO GmbH & Co. KG
Delivery address: Mackenrodtstraße 14
36039 Fulda, Germany
Postal address: 36035 Fulda, Germany
Phone: +49 661 6003-0
Fax: +49 661 6003-607
E-mail: mail@jumo.net
Internet: www.jumo.net
JUMO IMAGO 500
Multi-channel Process and
Program Controller
Brief description
The JUMO IMAGO 500 is a process and program controller with up to 8 controller
channels or 4 program channels. The instrument is built to the format 144 mm × 130 mm
for a standard 92mm × 92mm panel cut-out and a mounting depth of 170mm.
The display is a 5" TFT screen (27 colors). The layout of the screen templates can be
individually adapted and adjusted. Two freely configurable screen templates make it
possible to customize the placing of texts, process values, background pictures and
icons.
The controller features up to 8 analog inputs and 6 logic inputs, as well as six expansion
slots for switched or analog outputs. Four of these slots can be used alternatively for
analog inputs or outputs.
A setup program is available for conveniently configuring the instrument from a PC.
Linearizations for the usual transducers are stored within the controller, four customer-
specific linearization tables can be programmed.
A math and logic module can be used to adapt the instrument to a very wide range of
control tasks.
Two serial interfaces, RS422/485 or PROFIBUS-DP, serve to integrate the controller into
a data network.
Modules can be retrofitted quite simply by the user (see block structure).
The electrical connection is made at the rear of the instrument, via plug-in screw terminals.
Block structure
Analog input 1
Analog input 2
Analog input 3
Analog input 4
Logic inputs 1 — 6
for floating contacts
Analog input 5
Analog input 6
Analog input 7
Analog input 8
Analog inputs:
- resistance thermometers
- thermocouples
- standard signals
- potentiometer
- heating current
V1.00/EN/00398477
JUMO Instrument Co. Ltd.
JUMO House
Temple Bank, Riverway
Harlow, Essex CM20 2DY, UK
Phone: +44 1279 635533
Fax: +44 1279 635262
E-mail: sales@jumo.co.uk
Internet: www.jumo.co.uk
Expansion slots
Supply voltage
AC 110 to 240 V
AC/DC 20 to 30 V
Interface COM 1
setup / RS422/485
Interface COM 2
RS422/485
PROFIBUS DP -
Output board 1
(standard: 2 relays)
Output board 2
(standard: analog output)
Output board 3
Output board 4
Output board 5
Output board 6
JUMO Process Control, Inc.
6733 Myers Road
East Syracuse, NY 13057, USA
Phone: 315-437-5866
1-800-554-5866
Fax: 315-437-5860
E-mail: info.us@jumo.net
Internet: www.jumousa.com
Data Sheet 703590
Key features
• Brilliant 5" TFT screen with 27 colors
• Freely configurable screen templates
• Up to 8 controller channels
• 50 programs, with 1000 segments
• 16 limit comparators
• Modular hardware design
• Recording function
2 external relay
modules ER8
• Up to 4 cascade controllers
• PROFIBUS-DP interface
Output boards:
- 2 relays (make)
• Math and logic functions
- 1 relay (changeover)
- 2 logic outputs 0/14 V
- 1 logic output 0/22 V
• Teleservice via external modem
- 1 solid state relay -
- 1 analog output
- 1 supply for 2 wire -
• Setup program and program editor for
transmitter
22 V/30 mA
Approval/
approval marks
= standard version
= option
= accessory
JUMO IMAGO 500
Type 703590/ ...
under dynamic management
®
Windows 2000, XP, Vista, 7 (32-bit
and 64-bit)
Page 1/12