Meiko FV 28 GiO Operating Instructions Manual page 26

Operating instructions FV 28 GiO
Datei:1D3A4F9D.doc
MEIKO Maschinenbau GmbH & Co. KG, Englerstr. 3, D-77652 Offenburg, Tel.: +49/781/203-0, Fax: +49/781/203-1121
This corresponds to viewing and setting the status of outputs. (see 16.3.7)
Press the "I" key to move forwards or the "II" key to move backwards or the "accept" key
to make a selection. You are now at the current level.
You can leave this level by pressing the "0" key.
16.3.5 Viewing / modifying parameters: (depending on the code en-
tered)
Indication
this display by pressing the "accept" key.
Now, the first parameter will be displayed with a value.
Press the "I" key to move forwards or press the "II" key to move backwards, until the pa-
rameter you require is displayed.
Confirm the parameter to be modified by pressing the "accept" key, the value will flash.
Increase the value using the "I" key or reduce it using the "II" key and confirm with the
"Accept" key.
You can leave this level by pressing the "0" key.
See 16.4 for list of parameters.
16.3.6 Viewing input status:
Indication
this display by pressing the "accept" key.
Now, the first digital input will be shown, with status.
Use the "I" to go forward and the "II" to go backward until the desired input is displayed
Display: input set
Display: input not set
You can leave this level by pressing the "0" key.
W e reserv e the right to change execution and construction!
.
9671086
26/38