—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
Troubleshooting
Problem
Can not establish the USB
connection
between
device and PC.
Can not establish the Wi-Fi
connection
between
device and client.
The client connected to the
device can not access the
Internet.
When I use AP Station
mode,
the
client
access the Internet.
Can not visit the webGUI
configuration page.
About the password
For more assistance, please:
Send E-mail to mobile@zte.com.cn
•
Visit http://www.ztedevice.com
•
Call Service Hotline: +86–755–26779999
•
14 Confidential and Proprietary Information of ZTE CORPORATION
Suggested Solution
You need to install the software. Run the installation program in
your
path of My Computer > ZTEMODEM.
If the driver of your device is abnormal, please reinstall the
software. You need to uninstall the software first.
Make sure the Wi-Fi function is active.
your
Refresh network list and select the correct SSID.
Check the IP address to make sure your client can obtain an IP
address automatically in the Internet protocol (TCP/IP) properties.
Type the correct network key (Wi-Fi password) when you connect
to the device.
Make sure your (U)SIM card is available.
Change the location to find a place with good signal.
Check WAN Connection mode setting.
Contact with your service provider and confirm your APN settings.
Make sure the other WLAN device has already connected to the
cannot
Internet.
Make sure that the subnet of your device and the other WLAN
device is different
Enter the correct address. The default address is
or http://m.home.
Only use one network adapter in your PC.
Do not use any proxy server.
For the Wi-Fi connection password, please check the label on the
device.
The default password of the webGUI configuration page is admin.
If you changed the password and forgot the new password, you
need to restore the device to the factory default settings.
VODAFONE R209-Z Quick Guide
http://192.168.0.1
Need help?
Do you have a question about the Vodafone R209-Z and is the answer not in the manual?
Questions and answers