Error Code Call; Poor Cleaning Result; Increased Generation Of Noise - Winterhalter PT-M Operating Instructions Manual

9.1 Error code call

In the display, the following symbol flashes:
 Tap the following buttons in turn:

9.2 Poor cleaning result

The dishes do not get clean
There is formation of layers on
the dishes
The dishes do not dry on their
own
For machines without integral softener:
INFO The water quality affects the washing and drying performance. We therefore recommend from a
total hardness of more than 3° dH (0.53 mmol/l) that the machine is supplied with softened water.

9.3 Increased generation of noise

For ClimatePlus machine models:
In rare cases a loud humming noise may develop due to sound reflection. In this case we recommend the
installation of isolating buffers.
 Contact an authorised service technician for the installation.
 The error codes are displayed in area (a).
INFO
 Contact an authorised service technician for the repair.
 Press the button (b) twice to leave the menu.
Possible Cause
No or low detergent dosing
Dishes incorrectly sorted
Nozzles of the rotating wash
fields blocked
Temperatures too low
In case of limescale deposits:
The water is too hard
In case of starch residues:
Temperature of the manual pre-
cleaning (brush) is higher than
30 °C
No or low rinse aid dosing
Rinse temperature too low
Malfunctions already resolved are also displayed
here (e.g. ERR 1 OK).
Remedy
Set the dosing amount as per the manu-
facturer's specifications (
Check the dosing lines (for kinks, break-
age, ...)
Exchange the storage container, if empty
Do not stack dishes one over the other
Remove the rotating wash fields and
clean the nozzles (
Check temperatures (
Check the water preparation
Clean thoroughly
Lower the temperature of the manual
pre-cleaning
Carry out the basic cleaning programme
‎
( 1 2.5.2)
Set the dosing amount as per the manu-
facturer's specifications (
Check the dosing lines (for kinks, break-
age, ...)
Exchange the storage container, if empty
Contact an authorised service technician
for the repair
Malfunctions
‎
1 2.6)
‎
8 .2)
‎
1 0)
‎
1 2.6)
19