Aerohive HiveAP 20 ag Deployment Manual page 34

Multi-channel

Table of Contents

Chapter 3 Using HiveManager

TFTP Server

To load a HiveOS image file from a TFTP server:

1. On the Software Upgrade page, select TFTP, enter the following, and then click OK:

•

TFTP IP Address: (select); enter the IP address and port number of the TFTP server (the default port

number for TFTP is 69)

•

Image Path: Enter the path to the HiveOS image file. If the file is in the root directory of the TFTP server,

you can leave this field empty.

•

Image Name: Type the name of the HiveOS image file.

2. Click Finish to save the new software (without rebooting the HiveManager) or click Reboot to reboot the

HiveManager with the new software now.

Note: For the HiveManager to use the newly loaded image, you must reboot it.

Aerohive

Table of Contents

Need help?

Do you have a question about the HiveAP 20 ag and is the answer not in the manual?