Editing A Shopturn Multi-Channel Program - Siemens sinumerik 840D sl Operating Manual

Parameter Description
XA Outside diameter – (only for tube and cylinder)
XI Inside diameter (abs) or wall thickness (inc) – for tube only
Procedure
9.3.3.3

Editing a ShopTurn multi-channel program

Precondition
The "programSYNC" option is set.
Procedure
Turning
Operating Manual, 07/2010, 6FC5398-8CP40-0BA0
1. The double editor is opened and the cursor is positioned in the
G code program.
2. Press the "Misc." and "Blank" softkeys.
The "Blank Input" window opens.
3. Select the desired blank and enter the corresponding values.
4. Press the "Accept" softkey.
1. Position the cursor in the "Workpieces" folder on a job list and press
the "Open" softkey.
Note:
If the cursor is located on a workpiece, then a search is made for a job
list with the same name.
The "Job list ..." window opens and the program assignment to the
channels is displayed.
2. Press the "OK" softkey.
The programs are displayed next to one another in the editor.
3. Open the program header if you wish to define cross-program or
cross-channel entries.
Multi-channel support
9.3 Multi-channel editor
Unit
mm
mm
471