Chapter 2
Installation
This chapter describes the installation procedures for the power synchronized unit and the AC sensor unit.
Make sure to check
2.1
Package Contents Check
Check the list of package contents in
If there are missing parts, contact your sales representative.
Table 2.1
Package contents
Power synchronized unit
RS232C cable
Rack mount kit
Safety Precautions
Read Me First
Table 2.2
Package contents
AC sensor unit
AC sensor port connection cable
Branch connector
Rubber foot
Rack mount kit
FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide (Power Synchronized Unit)
"Safety Precautions" (page 9)
Table 2.1
List of package contents (power synchronized unit)
List of package contents (AC sensor unit)
before installation.
and
Table 2.2
to confirm that there are no missing parts.
Quantity
1
1m
2
For ETERNUS DX/AF connection
One set
1
1
Quantity
1
4m
1
For power synchronized unit connection
1
—
This is not used when the AC sensor unit is installed in a
4
rack.
One set
33
Copyright 2017 FUJITSU LIMITED
Note
—
—
—
—
Note
—
—
P3AM-8012-10ENZ0