Record A Macro - MA lighting grandMA2 User Manual

37.3. Record a macro

You can make a live recording of a macro.
This is the workflow when recording macros:
1. Start the macro recording
2. Type the needed commands
3. Stop the macro recording
The recording only contains commands that are visible in the Command Line Feedback and the time between the
commands.
It does not record fader movement and screen presses (unless they trigger a command).
The Record command is needed to start and stop the recording of macros. You can easily reach the Record
keyword by pressing the MA
When you have the Record keyword in your command line then you press the
number you want to record to - execute the command with a
If the macro you want to recording to, has already some content, the new recorded content will be added after the
existing commands.
To stop the recording you will need to use the Record keyword again. You can, but you do not need to specify the
macro number.
MA + Store (Record) Macro Please
Different things happen while you are recording a macro:
The background light of the
There is a small red circle in the upper right corner of the macro pool object you are recording to.
There is a icon in the message center part of the command line input.
The recorded macro will be a timed macro. This means that it will execute the commands with the same speed as
they where recorded.
If you have a macro pool visible then you can also tap the pool object to start and stop the recording:
1. Press MA + Store
2. Tap the macro pool object
It is the same workflow for starting and stopping the recording.
37.4. Edit a macro
© 2017 MA Lighting Technology GmbH | Dachdeckerstr. 16 | D-97297 Waldbüttelbrunn | Germany
Phone +49 5251 688865-30 | tech.support (at)malighting.com | www.malighting.com
Version 3.3
key together with the Store
ends the recording.
Store and Macro keys are flashing.
(Record)
key.
Macro
Please .
key and then type the macro
1178