Related Manuals for Stanley Fatmax
Summary of Contents for Stanley Fatmax
- Page 1 J7CS 350 AMP BATTERY JUMP-STARTER WITH COMPRESSOR INSTRUCTION MANUAL English page 3 Español pagina 11...
- Page 2 FEATURES FEATURES 1. USB Power button 2. USB Charging/Power Port (under protective cover) 3. 12 Volt DC Accessory Outlet (under protective cover) 4. USB power indicator 5. Battery Status LED Indicators 6. Reverse Polarity Indicator 7. Jump-Starter Power Switch 8. Area Light Power Button 9.
-
Page 3: Important Safety Instructions
SAFETY GUIDELINES / DEFINITIONS • Position charging adapter cords so they do not become entangled or become a safety hazard. Keep charging adapter cords away from sharp edges. DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. •... - Page 4 7. Turn ON the ignition and crank the engine in 5-6 second bursts until engine starts. Read this Instruction Manual 8. Turn the Jump-Starter Power Switch back to the OFF position. Congratulations on purchasing your new Stanley Fatmax 350 Amp Jump Starter with Compressor. ® ® and follow the instructions carefully before using this unit.
- Page 5 12 VOLT DC PORTABLE POWER SUPPLY WARNING: TO REDUCE THE RISK OF INJURY OR PROPERTY DAMAGE: • FOLLOW ALL SAFETY INSTRUCTIONS FOUND IN THE “Specific safety instructions for jump starters” section of this This portable power source is also for use with all 12 volt DC accessories equipped with a male accessory outlet plug and are rated up to instruction manual.
- Page 6 Portable Compressor will not inflate • Make sure the Compressor Power Switch is in the on position. • Make sure the nozzle connector is securely screwed on to the valve stem when attempting to inflate tires; or that the nozzle adapter is securely screwed into the SureFit™...
Need help?
Do you have a question about the Fatmax and is the answer not in the manual?
Questions and answers
plug location to recharge stanley fat max 350 battery charger
The plug location to recharge the Stanley Fatmax 350 battery charger is the 12-volt DC charging port located under the waterproof end cap on the back of the unit.
This answer is automatically generated