Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Corsair Carbide Series SPEC-02
Summary of Contents for Corsair Carbide Series SPEC-02
- Page 1 SPEC-02 CARBIDE SERIES® MID-TOWER GAMING CASE INSTALLATION GUIDE...
-
Page 2: Table Of Contents
SPEC-02 Table of Contents Case Specifications Congratulations: ................................1 Case specifications:..............................2 Accessory kit contents:.............................3 Case features: ................................4 Removing the side panels: ............................5 Utilizing the CPU power cable cut-out: ......................5 Installing the motherboard: ............................6 Installing the PCI-E/PCI card(s): ..........................6 Installing the PSU: ...............................7 Length: ...................... -
Page 3: Accessory Kit Contents
SPEC-02 Accessory Kit Contents Case Features I/O panel (x2 USB 3.0, Headphone/Mic, and Power/Reset) Removable front fascia Front 120mm LED intake fan with x2 140mm fan compatibility Rear 120mm exhaust fan x2 Top 120mm fan mounts Windowed side panel x3 5.25" Tool-free drive bays Cable ties MBD/HDD screws SSD/ODD screws... -
Page 4: Removing The Side Panels
I/O shield (see side panels back and out. your motherboard’s manual for guidance). Note: Corsair recommends removing both side panels and Align your motherboard with setting them aside when building the pre-installed standoffs. your system to avoid accidental damage. -
Page 5: Removing The Front Fascia
carbide spec-02 carbide spec-02 STEP 06 / sl SPEC-02 STEP 06 / sl 5. Installing the PSU (Power Supply Unit) 7. Installing an ODD (Optical Disk Drive) Position the PSU on the First, remove the front panel bottom of the case then align 5.25"... -
Page 6: Installing A Second Front Fan
carbide spec-02 SPEC-02 STEP 08 carbide spec-02 9. Installing a Second Front Fan 11. Installing the Front I/O Connectors STEP 08 To install an additional 120mm See your motherboard’s or 140mm fan, unscrew the manual for front panel header top fan then slide it down to locations and pin-outs. -
Page 7: Frequently Asked Questions
SPEC-02 Frequently Asked Questions Frequently Asked Questions 1. How do I remove the I/O Panel ? 3. Where can I mount a fan? If needed, you can uninstall your I/O panel by removing the front Fan Mount Locations fascia (step 6) then unscrewing the 2 screws at each side of panel.
Need help?
Do you have a question about the Carbide Series SPEC-02 and is the answer not in the manual?
Questions and answers