Panasonic EP-MR30 Operating Instruction page 13

2
Check the power cord and the power plug.
WARNING
• Remove dust from the power plug periodically.
Failure to observe this precaution may result in
electrical fire due to deterioration of insulation caused
by dust and moisture.
Remove dust with a dry cloth.
• Do not damage the power cord or power plug.
(Do not damage, alter, expose to heat sources, bend,
twist, pull forcibly, bundle or place heavy objects on
the cord.)
Using the damaged power cord or power plug may result in electric shock, short-circuit or fire.
Contact your nearest authorised service centre for repair.
3
Insert the power cord into the AC inlet on the
unit.
Be sure to insert the power cord all the way into the inlet.
4
Insert the power plug into an electrical outlet.
WARNING
• Always insert the power plug all the way into the outlet.
Failure to observe this precaution may result in electric shock or fire due to heat
generation.
• Do not exceed the rated values of the plug and the wiring or use any voltage other
than the rated voltage.
(Do not use the unit with a transformer.)
Failure to observe this precaution may result in electric shock, malfunctioning or fire due to heat generation.
• Do not plug/unplug the power plug with wet hands.
Failure to observe this precaution may result in electric shock.
5
Set the main power switch to the "|" (ON)
position.
NOTE
The power will turn off automatically if no operation is
performed within 120 minutes after turning on the
power.
Check for dirt and damage.
Check for damage.
HOW TO USE
GB12