Remove A Baby Unit - VTech VM321 User Manual

Appendix

Remove a baby unit

If you want to remove a baby unit, you need to power on the
baby unit (pages 7, 9 and 25) and the parent unit (pages 8, 11
and 25) before unpairing.
To remove a baby unit:
Press MENU/
1.
2. Press
/VOL +
press
MENU
3. Press
/VOL +
/SELECT.
MENU
4. Press
/VOL +
then press
5. Press [zoom] and then press
your selection.
6. When unpairing is successful, the screen displays the next
paired baby unit or returns to the previous baby unit viewing
screen. If all baby units are unpaired, the screen displays
No CAM paired.
If unpairing fails, you need to reset the baby monitor and then
try the unpairing process again.
To reset:
1. Power off the baby unit and the parent unit.
2. Unplug the power and/or batteries from the baby unit and
the parent unit, then plug them back in.
3. Power on the baby unit and the parent unit.
when the parent unit is not in use.
SELECT
to choose PAIR/UNPAIR, then
or
/VOL -
/SELECT.
to choose UNPAIR CAM, then press
or
/VOL -
or to choose the desired baby unit,
/VOL -
/SELECT.
MENU
/SELECT to confirm
MENU
30