Phoenix D385 Owner's Manual
  1. Manuals
  2. Brands
  3. Phoenix Manuals
  4. Dehumidifier
  5. D385
  6. Owner's manual

Phoenix D385 Owner's Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Owner's Manual — Phoenix D385
The Phoenix D385 provides the perfect combination of
features and performance the restoration industry has been
craving in a desiccant dehumidifier. Designed to operate
vertically or horizontally, the Phoenix D385 provides the
wide operating range and ultra-low grains of a desiccant with
the water removal capacity of the largest LGR's in cabinet
dimensions identical to our popular Phoenix
200 Max.
The D385 delivers 385 CFM of ultra-low grain process air and
removes an incredible 130 pints per day at AHAM conditions.
The true four hole configuration* allows the Phoenix D385 to
be located in the affected area with the 75 CFM re-activation
air stream isolated from the drying chamber. Three hole
designed units** inherently pull unaffected and/or outside
air into the drying chamber. The D385's four hole design
allows the restoration contractor to set-up for effective
positive, neutral or negative pressure operation.
Able to operate vertically or horizontally, the D385 will fit
inside most crawlspaces. Having the D385 securely inside,
rather than outside the crawlspace access, deters the
possibility of tampering with the dehumidifier or the set-up.
The Phoenix D385 Desiccant Dehumidifier
• Ultra low grains
• Wide operating range
• 130 pints per day @ AHAM
• Operates vertically or horizontally
• Process airflow 385 CFM
• Two 23' power cords:
12 Amps per cord
24 Amps
115 Volts/60 Hz
• Unlimited ducting possibilities
• Legendary stainless construction
Specifications subject to change without notice.
Toll-Free 1-800-533-7533
4201 Lien Rd • Madison, WI 53704
Installation, Operation & Service Instructions
Read and Save These Instructions
The 385 CFM of process air will provide 3 ACH on an affected
area up to 7000 cubic feet.
The Phoenix D385 is easy to transport and set-up. The
D385 will fit on your truck in the areas already designed
for your LGR's and will move around the jobsite with the
same portability. All the power to the unit is provided by
two 115 volt grounded power cords. Simply plug the cords
into separate 15 amp circuits. Each cord draws only 12
amps to power the D385. The re-activation air stream is
ducted through 6" flex duct provided with the unit and stores
conveniently in the top of the unit.
*Having completely separate process and regeneration airstreams.
**Where regeneration airstream is pulled from the process airstream.
Phoenix D385
PN 4026700
1
www.UsePhoenix.com • sales@UsePhoenix.com
TS-387
03/17

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the D385 and is the answer not in the manual?

Questions and answers

Related Manuals for Phoenix D385

Summary of Contents for Phoenix D385

  • Page 1: Introduction

    The Phoenix D385 is easy to transport and set-up. The vertically or horizontally, the Phoenix D385 provides the D385 will fit on your truck in the areas already designed wide operating range and ultra-low grains of a desiccant with for your LGR’s and will move around the jobsite with the the water removal capacity of the largest LGR’s in cabinet...

  • Page 2: Table Of Contents

    3.4 Control Panel ............. 4 • DO NOT use the Phoenix D385 as a bench or table. 3.4A Power Switch ............. 4 • Do not operate the Phoenix D385 at an altitude higher 3.4B Pilot Light ............

  • Page 3: Operation

    3.2 Avoiding Secondary Damages 4021475 16” x 20” x 2” MERV 11 Filter (Standard) The D385 is a powerful tool capable of removing a great deal of water from most environments. Care must be taken to 4024969 16” x 20” x 2” MERV 6 Filter (Optional) avoid secondary damages of over-drying and or unexpected 4022164 16”...

  • Page 4: Control Panel

    When inflated this ducting forms a 10” circle. 10” lay flat There is no dehumidistat (see over-dry warning section 2.2). ducting attaches to the D385 by means of a 12”x 6” wire rectangle. To attach lay flat ducting to the process exhaust air 3.4B Pilot Light...

  • Page 5: Blower Motor And Rotor Drive Motors

    5 Service Reactivation air stream filter: This 12”x12 x1” filter is located in the bottom of your D385. To change the reactivation air filter, lay the D385 down in a horizontal position. The filter access slot is located on the CAUTION: Servicing the Phoenix D385 with its high voltage bottom of the machine (Fig.

  • Page 6: Normal Operation

    REGEN CAPACITOR BLK 11 5.3 Normal Operation BLK 11 BLK 10 ORG 28 PROC BLOWER PROC CAP 1. The D385 is connected to two 110-120VAC branch RELAY 1 RELAY 2 circuits ORG 12 BLK 10 WHT 13 BLU 27 BLU 27 2.

  • Page 7: Service Parts List

    FILTER, AIR, 12 X 12 X 1, REACTIVATION AIR Shown REPLACEMENT KIT 4026798 FAN, MOTORIZED IMPELLER, REACTIVATION AIR 4037807 HEATER CORE, PHX D385 4029266 TOP COVER, DESICCANT 385 4026898 THERMAL OVERLOAD CUT-OUT SWITCH, PROCESS AIR 4035235-11 CAPACITOR, RUN, 8 MFD, DRY, REACTIVATION AIR...

  • Page 8: Warranty

    (but all warranty periods will be extended by the period of time, if any, that the Phoenix D385 Dehumidifier is out of service while awaiting covered warranty service).

Table of Contents