3.10.6 Automatic Mode
3.10.6 Automatic Mode
You can set up Automatic Mode.
Note
•
Depending on the Network Camera, this feature may not be available.
Auto Pan
The Network Camera can be set to pan horizontally (left–right) repeatedly over its entire viewing range.
[While displaying a video feed from a Network Camera (operation screen)]
1.
Press /
MENU
2.
Tap "Camera Settings".
3.
Tap "Auto Mode".
4.
Tap "Auto Pan", and then tap "OK".
To cancel Automatic Mode, tap "Off", and then tap "OK".
*1
Preset Sequence
You can have the Network Camera display multiple preset viewing positions in a repeating cycle.
[While displaying a video feed from a Network Camera (operation screen)]
1.
Press /
MENU
2.
Tap "Camera Settings".
3.
Tap "Auto Mode".
4.
Tap "Preset Sequence", and then tap "OK".
To cancel Automatic Mode, tap "Off", and then tap "OK".
*1
Automatic Tracking
You can have the camera automatically follow a moving object.
[While displaying a video feed from a Network Camera (operation screen)]
1.
Press /
MENU
2.
Tap "Camera Settings".
3.
Tap "Auto Mode".
4.
Tap "Auto Tracking", and then tap "OK".
To cancel Automatic Mode, tap "Off", and then tap "OK".
*1
3.10.7 Receiving Alarms from Network Cameras
When an alarm from a Network Camera (movement detection, error, abnormality, etc.) is detected, this unit
can display the video feed from the camera that issued the alarm.
Note
•
Alarms can be indicated by a sound and/or a pop-up message on the display.
•
Depending on the Network Camera, this feature may not be available.
86
Operating Instructions
.
*1
.
.
*1
*1
Document Version: 2017-08