Easy Dialing - Panasonic KX-HDV430 Operating Instructions Manual

3.1.2 Easy Dialing

Using the redial list
The last phone number dialed is stored in the redial list.
1.
In standby mode, press
2.
Go off-hook.
*1
When you do not go off-hook at this step, it will be a call using the speakerphone.
*1
Note
•
The type of call (voice or video) is the same as the previous outgoing call (KX-HDV430 only).
•
If this procedure is performed during a conversation, the conversation will end, and then redialing is
performed.
Hot Key Dialing
You can assign a phone number to each number key and then access the desired phone number by simply
pressing and holding the assigned number key. (See "4.3 Using Hot Keys".)
1.
Press and hold the dialing key (0–9) assigned as a Hot Key for more than 1 second.
2.
Do one of the following:
a.
Go off-hook.
b.
Tap "Phone Number".
Do one of the following:
– Tap "Voice Call" to make a voice call.
– Tap "Video Call" to make a video call (KX-HDV430 only).
The type of call that is established depends on the "Call Mode" setting (KX-HDV430 only).
*1
Note
•
While the Hot Key's information is displayed, you can tap
•
If Hot Key dialing is set to "Auto", a Hot Key number can also be dialed by pressing and holding the
assigned dialing key for a specified number of seconds.
Using the Hot Line
If your administrator has configured this function, you can make a call to a registered phone number
automatically. Contact your administrator for further information.
1.
In standby mode, go off-hook.
Using the Incoming/Outgoing Call Log
Using the Incoming Call Log
1.
In standby mode, tap
2.
Do one of the following:
a.
Tap (Incoming Call Log).
b.
Tap (Missed Call Log).
3.
Tap or , and then select an incoming call log.
4.
Do one of the following:
Document Version: 2017-08
/ / REDIAL .
*1
or , and then select "Call History".
or to select another Hot Key number.
Operating Instructions
3.1.2 Easy Dialing
57