Point (Line Regression); Key Points For Test Measurement And Adjustment (Line Regression) - Omron FH-3 Series Reference Manual

Point (Line Regression)

"Point" is only valid if "Calculate distance between line and point" is selected in "Select function".
1
Click [Point] in the Item Tab area.
2
Click [...] for the expression and set the
expression.
The Setting Expression window is displayed.
3
After setting up the expression, click [OK].
The expression is confirmed.

Key Points for Test Measurement and Adjustment (Line Regression)

The following content can be confirmed in the "Detail result" area using text.
Displayed items
Judge
Line parameter 0 A
Line parameter 0 B
Line parameter 0 C
Line parameter 1 A
Line parameter 1 B
Line parameter 1 C
Cross point X
Cross point Y
Angle
Point X
Point Y
Distance
632
Line Regression
Judgement result
Parameter A of line 0
Parameter B of line 0
Parameter C of line 0
Parameter A of line 1 (only displayed when calculating the intersection of 2 lines)
Parameter B of line 1 (only displayed when calculating the intersection of 2 lines)
Parameter C of line 1 (only displayed when calculating the intersection of two lines)
X coordinate of intersection (only displayed when calculating the intersection of two lines or
calculating the distance between a line and a point)
Y coordinate of intersection (only displayed when calculating the intersection of two lines or
calculating the distance between a line and a point)
Angle between two lines (only displayed when calculating the intersection of two lines)
X coordinate of input point (only displayed when calculating the distance between a line and a
point)
Y coordinate of input point (only displayed when calculating the distance between a line and a
point)
Distance between line 0 and an input point (only displayed when calculating the distance
between a line and a point)
Description
FH/FZ5 Processing Item Function Reference Manual