Optical Drive Indicator; Inserting Or Removing A Cd/Dvd; Optical Drives - Fujitsu Siemens Computers CELSIUS Mobile H Easy Manual

Hide thumbs Also See for CELSIUS Mobile H:

Table of Contents

Depending on the model, your notebook is equipped with a CR-ROM drive, a CD-RW drive, or a DVD-

ROM drive.

This device contains a light-emitting diode, classified according to IEC 825-1:1993: LASER

CLASS 1, and must not be opened.

Avoid touching the surface of a CD/DVD. Handle CDs/DVDs only by their edges!

Always store CDs/DVDs in their cases. Thus you avoid dust contamination, scratches,

bending or other damage.

Protect your CDs/DVDs from dust, mechanical vibration and direct sunlight!

Avoid storing a CD/DVD in areas subject to high temperatures or humidity.

You may use both 8-cm and 12-cm CDs/DVDs in the optical drive.

When using CDs/DVDs of minor quality vibrations and reading errors may occur.

Optical drive indicator

The indicator

flashes when a CD/DVD is inserted. The indicator goes out when the drive is ready-

to-operate. The indicator lights up when the drive is accessed.

If the indicator does not go out after the CD/DVD is inserted, and continues to flash, the

CD/DVD is probably damaged or dirty.

The notebook must be switched on.

Push the insert/eject button (1).

The drive tray will open.

Pull the drive tray completely out.

Place the CD/DVD in the drive tray with the label facing upwards.

Take out an inserted CD/DVD.

Push in the drive tray until you feel it lock into place.

Table of Contents

Do you have a question about the CELSIUS Mobile H and is the answer not in the manual?