Responding To The Notification Of Upgrade; Voice Announcement - Motorola 1.5 User Manual



Responding to the notification of Upgrade

Procedure:
1
The display shows Upgrade?.
2
Press the Menu Select button below Acpt to accept the
request to upgrade immediately. The display shows
Upg Rx In Prog to indicate the upgrade received is in
progress.
OR
Press the Menu Select button below Dlay to delay the
request to upgrade. The radio prompts to upgrade in the
next power up of your radio.
OR
Press the Menu Select button below Rej to reject the
request to upgrade. The display shows Upg Aborted. The
radio continues to function with the current configuration
until it gets reprogrammed.
3
If the upgrade is successful, the display shows Program
done.
OR
If the upgrade failed, the display shows Program failed.
The radio remains in current configuration.
If your radio has problem of upgrade over-the-air, consult the
qualified technician for details.
42
English

Voice Announcement

This feature enables the radio to audibly indicate the current
feature mode, zone or channel the user has just assigned. This
audio indicator can be customized per customer requirements.
This is typically useful when the user is in a difficult condition to
read the content shown on the display.
Each voice announcement is within a limit of three seconds
maximum. The sum duration of all different voice
announcements in a radio shall be no more than 1000 seconds.
Note: This feature must be preprogrammed by a qualified
radio technician.
Check with your agent if Voice Announcement is
available for the feature you need.
The two options of priority for the Voice Announcement
available are:
•
High – enables the voice of the feature to announce even
when the radio is receiving calls.
•
Low – disables the voice of the feature from announcing
when the radio is receiving calls.