Changing Channels During Emergncy; Using The Emergency Keep-Alive Feature - Motorola 1.5 User Manual



Changing Channels during Emergncy

For ALL Emergency signals, when changing channels:
•
If the new channel is also preprogrammed for Emergency,
you can change channels while in Emergency operation. The
emergency alarm or call continues on the new channel.
•
If the new channel is NOT preprogrammed for Emergency,
the display shows No emergency, and you hear an invalid
tone until you exit the Emergency state or change to a
channel preprogrammed for Emergency.
38
English


Using the Emergency Keep-Alive Feature

This feature, when enabled, prevents the radio from being
turned off via the MFK when the radio is in the Emergency
state.
Note: The radio only exits the Emergency state using one of
the ways mentioned in the previous sections.
See Sending an Emergency Alarm on page 36,
Sending an Emergency Call (Trunking Only) on
page 36, Sending an Emergency Alarm with
Emergency Call on page 37, or Sending a Silent
Emergency Alarm on page 37.