Table of Contents
Advertisement
1G
11
INSTRUMENT CLUSTER (METER)
T
Speedometer does not operate or indication incorrect
Step 1
.
1. Verify that the speedometer cable is properly connected.
Step 2
1. Disconnect the speedometer cable from the instrument clus-
ter and transmission case.
2. Verify that the cable and gear spine easily when turned by
. hand.
3. If the cable or gear is stiff, replace the speedometer cable
or gear.
4. If the speedometer cable and gear are OK, replace the
speedometer.
Tachometer does not operate
9TGOTX·110
9TGOT)(.109
1. Remove the instrument cluster.
2. Connect a test tachometer between terminals 1 G and 1
J
of
the harness side connector.
3. Start the engine.
4. Check that the test tachometer indicates engine speed.
Indicates rpm
Action
Yes
Replace tachometer
No
Repair wire harness (Instrument
cluster-Pickup sensor)
T-65
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the TRADER and is the answer not in the manual?
Questions and answers
do you have a parts manual for 92 Ford Trader Camper (410)?
Yes, a parts manual is available for the Ford Trader, as shown by the indexed sections listing components, tools, and dimensions. However, the exact match for a 1992 Ford Trader Camper (410) is not specifically confirmed.
This answer is automatically generated
Drag link arms right hand can you point that out to me