Ethernet
2.2.41 UDP 3000 port command
Printer Escape Sequence
-----
14 01 00
-----
15 02 n
GS 0 EOT
1D 30 04
US SYN
1F 16
GS 0 ENQ
1D 30 05
GS 0 BEL
1D 30 07
GS 0 HT
1D 30 09
GS 0 FF
1D 30 0C
2.2.42 UDP 3001 port command
ASCII:
Hexadecimal:
Decimal:
Values of n:
When send above command to the printer, need to add Sequence Number of 4bytes before command.
Special command for the production
2.2.43 I/F Change special command
ASCII:
Hexadecimal:
Decimal:
Values of n:
The value which specified by n is stored in EEPROM as Interface Type, and "Reboot" will be performed.
If some data are sent following this command, they will be cleared (discarded).
Printer Status
Printer Recovery
Get Printer ID, Remote Diagnostics Extension
Select Response Format
Report Printer configuration
Get Personality
Get File Header
Get Printer Model
ESC n n
1B 6E n
27 110 n
20 = Ethernet Information (34bytes)
Serial number (10bytes) + Model number (15bytes) + MAC address (6bytes)
21 = Serial number (10bytes)
22 = Model number (15bytes)
23 = MAC address (6bytes)
GS d FFH n
1D 64 FF n
29 100 255 n
0 = USB
1 = Ethernet
2 = Parallel
28
Function
DB-EA4D Command manual (rev.00)