System Commissioning - Huawei SmartLogger2000 Quick Manual

12.3 Optical Port Indicators
13

System Commissioning

NOTE
You can connect the SmartLogger to the SUN2000 APP, embedded WebUI, or NetEco to
commission the SmartLogger and the devices connected to it. This document describes how to
perform commissioning by connecting the SmartLogger to the SUN2000 APP.
Connecting the SUN2000 APP
13.1
NOTE
1. The SUN2000 app is a convenient maintenance platform that communicates with the
monitoring system for you to query alarms, configure parameters, and perform routine
maintenance. The app name is displayed as SUN2000.
2. Mobile phone operating system: Android 4.0 or later, or iOS 7.0 or later.
3. To download the SUN2000 app software package available for Android, access Huawei app
store (http://appstore.huawei.com) or Google Play ( https://play.google.com), and search for
SUN2000.
4. To download the SUN2000 app software package available for iOS, access App Store and
searches for SUN2000.
5. The Android-oriented app connects to the monitoring system over Bluetooth or USB data cable.
The iOS-oriented app connects to the monitoring system over Bluetooth. The app connects to
the SmartLogger only over Bluetooth.
6. This document uses the WebUIs of Android-oriented SUN2000 app V200R001C00SPC020 as
an example.
Indicator Status
Green off
(1) Upper
Green steady on and
optical port
yellow blinking quickly
(0.1s on and 0.1s off)
(2) Lower
Green steady on and
optical port
yellow off
Green steady on and
yellow blinking slowly
(0.1s on and 1.9s off)
22
Meaning
The SmartLogger is not
powered on, and no
optical module is inserted
into the Ethernet optical
port.
An optical module has
been inserted into the
Ethernet optical port.
An optical fiber link has
been successfully
established.
Optical fiber
communication is in
progress.