Huawei E5832 Installation Manual
  1. Manuals
  2. Brands
  3. Huawei Manuals
  4. Modem
  5. Maxis E5832
  6. Installation manual

Huawei E5832 Installation Manual

Virgin mobile software installation
Hide thumbs Also See for E5832:
1
2
3
4
5
6
7
8
9
Table of Contents

Advertisement

Quick Links

See also: User Manual

USB

1. Connect the USB extension cable to your modem.
2. Insert the USB cable in to a spare USB port on your computer.
3. Twirl the cable around like a jump rope until it make a whooosh noise (not compulsory or
even recommended).
4. Follow the relevant steps below to install the Virgin Mobile Software.

Wi-Fi

Note : Your computer must have a wireless network card or adapter in order to connect wirelesssly.
1. The modem has a built in wireless router and allows you to connect wirelessly to the
modem, and through it, to the internet.
2. Wi-Fi is enabled by default on your USB modem.
3. The wirelessly connection is secured by a pre-configured, randomly generated, 13 digit, 128-
bit, WEP (Wireless Equivalent Privacy) passkey.
To be able to connect wirelessly, you'll need to follow the steps below :
1. Power off your modem. (power and hold the power button).
2. Remove the back cover and battery from the modem (slowly and seductively).
3. Find and write down the SSID and WEP key from thelabel.
4. Re-insert the battery and replace the back cover.
5. Power on the modem by pressing and holding the power button.

How to Install

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the E5832 and is the answer not in the manual?

Questions and answers

Related Manuals for Huawei E5832

Summary of Contents for Huawei E5832

  • Page 1 How to Install 1. Connect the USB extension cable to your modem. 2. Insert the USB cable in to a spare USB port on your computer. 3. Twirl the cable around like a jump rope until it make a whooosh noise (not compulsory or even recommended).
  • Page 2 6. Make sure that your Wi-Fi is turnet on and that your modem has established a connection to the network. 7. Skip to the steps relevant to your operating system. Windows XP 1. From Windows Start menu, select Control Panel. 2.
  • Page 3 5. Laugh at your neighbours’ funny wireless network names, then double-click or click connect on the Virgin Mobile or Virgin Broadband connection. 6. You’ll be promted for the network key. 7. Enter the key in both fields and click connect. 8.
  • Page 4 Windows Vista 1. Click Start, then control panel. 2. There are two view options on left of the control panel screen; ‘Control Panel Home’ and ‘Classic View’. Select Control Panel Home if it’s not already selected. 3. Click Network and internet.
  • Page 5 4. Click Network and sharing center. 5. Under the “Tasks” list on theh left, click connect to a network. 6. A new window will pop up. Find the virginmobile or virgin broadband connection from the list and double-click on it. 7.
  • Page 6 Windows 7 1. Click start, the Control Panel. 2. There are View by options on top right of the Control Panel screen; Select Category if it’s not already selected. 3. Click View Network Status and Tasks which is located under Network and Internet.
  • Page 7 4. Click Connect to a network which is under Change your networking setting. 5. A new window will pop-up. Find the virginmobile or virgin broadband connection from the list and click Connect.
  • Page 8 6. A new window will pop up asking to put the security key. Type in the WEP key and click OK. 7. After approximately a minute the message “Connected” will display in the dialog box and an icon will appear in the Windows 7 notification area. Apple OS X 10.4 If you already user Apple airport, the airport icon will likely appear on your menu bar.
  • Page 9 5. Click on the Advanced button if it’s not listed. 6. Make sure the virginmobile connection is listed as the first entry. If it’s not, click the + button to find and add it. 7. The Add network dialogue will appear. 8.

Table of Contents