Table of Contents
Advertisement
SOFTWARE OVERVIEW
DESCRIPTION
NOTE
CONFIGURATION
WIZARD
4–2
Using the EnerVista P485/D485 Setup software
When creating a new sub network configuration, EnerVista P485/D485 Setup provides a
choice between starting out with a blank configuration, or using a predefined template
(configuration wizard).
•
Configuration Wizard: The wizard option automatically creates a configuration
based on information about the sub-network (Modbus) devices; that is, the user simply
has to "fill in the blanks".
•
Blank Configuration: This option should be used when creating a new configuration
when the configuration wizard does not fit the application or to modify an existing
configuration for a new application. The following chapters will describe the
configuration process in detail.
It is recommended to use the configuration wizard for its simplicity of use with GE relays
and meters.
The online help system explains each configuration step in detail.
The purpose of the configuration wizard is to help you through the process of creating a
project with a Modbus RTU sub-network. When the wizard is finished, it is possible to
continue editing the project in the configuration tool.
The EnerVista P485/D485 Setup software will open with following screen to select the
configuration.
Select Configuration Wizard and click on OK.
D485 MODBUS TO DEVICENET CONVERTER – USER GUIDE
Advertisement
Table of Contents
