Sharp PN-L401C Operation Manual page 53

(5) Dual-Touch Gesture
Set whether dual touch is enabled. When enabled, the following actions are possible:
• "Zoom" can be used to change the sheet display magnification, and two-finger drag can be used to change the display
position. (Page 40)
• Two-finger left/right drag can be used to change the sheet. (Page 21)
TIPS
• When using a PN-L series (excluding the PN-L401C/PN-40TC1/PN-L603A/PN-60TA3/PN-L603B/PN-60TB3/PN-L603W/
PN-60TW3/PN-L703A/PN-70TA3/PN-L703B/PN-70TB3/PN-L703W/PN-70TW3/PN-L803C/PN-80TC3), set "Touch Mode
Setting" of the touch panel driver to "Dual", and "Input Mode Setting" to "Standard" or "HandWrite".
When using the PN-L603A/PN-60TA3/PN-L603B/PN-60TB3/PN-L603W/PN-60TW3/PN-L703A/PN-70TA3/PN-L703B/
PN-70TB3/PN-L703W/PN-70TW3/PN-L803C/PN-80TC3, set "Touch Operation Mode" of the Touch Panel Settings Tool to
"Multi-Touch Mode", and "Input mode" of the Touch Pen Utility* to "Standard".
* This is required when using 3 button pen (sold separately) with the PN-L603B/PN-60TB3/PN-L703B/PN-70TB3.
• Dual touch may not operate correctly in the following cases:
Touching is too quick.
The distance between the 2 points is too short.
The 2 points intersect.
The points are aligned horizontally or vertically.
(6) Simultaneous Drawing with Multiple Fingers
Set to "Enable" when drawing with multiple fingers.
To use this function, set "Dual-Touch Gesture" to "Disable" and "Touch Pen" to "Finger mode enabled". (Page 52)
(7) Automatically Find Eraser
When set to "On", the pen automatically change to the eraser when the screen is touched with the eraser in pen mode. (Page
27)
This cannot be selected if a model that can use this function is not connected when the Pen Software is launched.
TIPS
• If a different model is also connected, "Automatically Find Eraser" will not operate correctly.
• To use this function with the PN-L series (excluding the PN-L401C/PN-40TC1/PN-L603A/PN-60TA3/PN-L603B/PN-60TB3/
PN-L603W/PN-60TW3/PN-L703A/PN-70TA3/PN-L703B/PN-70TB3/PN-L703W/PN-70TW3/PN-L803C/PN-80TC3), set
"Input Mode Setting" to "Standard" in the touch panel driver.
When using the PN-L603A/PN-60TA3/PN-L603B/PN-60TB3/PN-L603W/PN-60TW3/PN-L703A/PN-70TA3/PN-L703B/
PN-70TB3/PN-L703W/PN-70TW3/PN-L803C/PN-80TC3, set "Input mode" of the Touch Pen Utility* to "Standard".
If set to other than "Standard", the eraser auto recognition function cannot be used.
* This is required when using 3 button pen (sold separately) with the PN-L603B/PN-60TB3/PN-L703B/PN-70TB3.
(8) Color Universal Design
When set to "Enable", color and line thickness will change to enable better visibility for most people, regardless of differences
of color vision between individuals. When set to "Disable", the text and line drawing function will change as follows:
• Selectable line colors will change. (Page 26, 28, 29, 30)
• You will be able to draw finer lines. (Page 26, 28, 29)
• You will be able to select "Custom" for line color and thickness. (Page 26, 28, 29, 30)
• You will be able to freely select the "Background color of new sheet". (Page 57)
(9) Restore Default Settings
Reset the settings to the initial values.
TIPS
• Language (page 58) and Color Universal Design will not reset to the default setting.
53
E