Sharp PN-L401C Operation Manual page 26

n Changing the color and thickness of the pen
If you touch the icon of the selected "Pen 1" to "Pen 3" again, the type, color, and thickness settings menu will appear.
TIPS
• When Color Universal Design (page 53) is "Enable", the line colors and thicknesses that can be set change to colors and
thicknesses that are clearly visible. When "Disable", you can select "Custom" to set the line color and thickness as desired.
When Color Universal Design is "Enable"
(1)
(2)
(3) (4)
To close the settings, touch
(1) Select the pen type.
Pen: Draws a uniform solid line.
Brush: The line width varies depending on the pen pressure. (Only with 3 button pen and digitizer pen.)
Highlighter: Draws a line without hiding objects under the line.
Figure pen: See page 29.
(2) Set the color and thickness of the line.
When Color Universal Design (page 53) is "Disable", "Custom" can be selected. Click the
color" to select.
(3) Check this box to make the line translucent.
* This is always selected when "Highlighter" is used.
(4) Smoothes drawn lines.
* Cannot be used when "Highlighter" or "Figure pen" is used.
or a point outside the settings menu.
When Color Universal Design is "Disable"
(1)
(2)
(3)
26
E
(4)
mark of "Other width" and "Other