Anynet+ (Hdmi-Cec) Isn't Working - Samsung QA55Q7FAMKLXL E-Manual

Anynet+ (HDMI-CEC) Isn't Working

When Anynet+ (HDMI-CEC) isn't working, these steps may help resolve the problem.
The problem
Anynet+ does not work.
I want to start Anynet+.
I want to exit Anynet+.
The message "Connecting
to Anynet+ device..." or
"Disconnecting from
Anynet+ device" appears
on the screen.
The Anynet+ device won't
play.
Confirm that the device is an Anynet+ device. The Anynet+ system supports Anynet+ devices
only.
Check if the power cord of the Anynet+ device is properly connected.
Check the cable connections of the Anynet+ device.
Go to Anynet+ (HDMI-CEC)
Anynet+ (HDMI-CEC)) and see if
Anynet+ may not function when some other functions are active, including Channel Search,
Smart Hub, Initial Setup, etc.
If you have disconnected and then reconnected the HDMI cable, scan for devices again or turn
your TV off and on.
Move the focus to the Anynet+ device at
button.
Check if the Anynet+ device is properly connected to the TV, and then select
CEC) ( Settings
menu to see if Anynet+ (HDMI-CEC)
Set Anynet+ (HDMI-CEC) (
Anynet+ (HDMI-CEC)) to Off.
You cannot use the remote control when the TV is configuring Anynet+ or switching to a
viewing mode. Use the remote control after the TV has completed the Anynet+ configuration or
has switched to a viewing mode.
You cannot use the play function when
Try this!
( Settings General
Anynet+ (HDMI-CEC)
Source, and then press the up directional
General External Device Manager
is set to On.
Settings General
Start Setup is in progress.
- 99 -
External Device Manager
has been set to On.
Anynet+ (HDMI-
Anynet+ (HDMI-CEC))
External Device Manager