Display Session Relation-Table - HP HSR6600 Command Reference Manual

Syntax
display session hardware slot slot-number [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
slot slot-number: Displays the session count on the specified card. The slot-number argument represents
the number of the slot where the card resides.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
This command is supported by only the SPE-FWM-200, SPE-IPS-200, SPE-ACG-200, and FIP600 cards.
The following matrix shows the display session hardware command and hardware compatibility:
Hardware
6602
HSR6602
6604/6608/6616
Examples
# Display session count on the card in slot 3.
<Sysname> display session hardware slot 3
Current hardware session(s): 100

display session relation-table

Use display session relation-table to display relationship table entries.
Syntax
display session relation-table [ slot slot-number ] [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Compatibility
No
No
Yes
421