Bridge Forwarding Table; Switch Forwarding Table - HP MSM317 Installation And Configuration Manual

Spanning Tree Protocol
For complete definitions of these fields refer to the following document, which is available in
a number of locations on the Internet.
ANSI/IEEE Std 802.1D, 1998 Edition - Part 3: Media Access Control (MAC) Bridges

Bridge forwarding table

This table lists the forwarding entries learned by the bridge.
Port
Identifies the port on the access device on which traffic is forwarded. The interface number
corresponds to the last digit of the port ID in the Bridge stats box.
MAC address
Identifies the MAC address to be matched. Traffic addressed to this address is forwarded on
the corresponding port.
VSC ID
Internal identifier assigned to a VSC. For use by HP support.
VLAN
Identifies the VLAN that the MAC address is associated with.
Authorized?
Indicates if the wireless client is authorized to send traffic on the bridge.
Local?
Yes: Indicates that the MAC address identifies an interface on the access device.
No: Indicates that the MAC address is learned (not on the access device).
Aging
Indicates the elapsed time (in milliseconds) since the last frame was received from the device.

Switch forwarding table

This table lists the forwarding entries learned by the access device switch.
Port number
Identifies the port on the access device on which traffic is forwarded. The interface number
corresponds to the last digit of the port ID in the Bridge stats box.
MAC addr
Identifies the MAC address to be matched. Traffic addressed to this address is forwarded on
the corresponding port.
VSC ID
Internal identifier assigned to a VSC. For use by HP support.
VLAN
Identifies the VLAN that the MAC address is associated with.
Authorized?
Indicates if the wireless client is authorized to send traffic on the bridge.
Local?
Yes: Indicates that the MAC address identifies an interface on the access device.
No: Indicates that the MAC address is learned (not supported on the access device).
Aging
Indicates the elapsed time (in milliseconds) since the last frame was received from the device.
54 Initially configuring