Related Manuals for Qtx QX15PA Plus
Summary of Contents for Qtx QX15PA Plus
- Page 1 QXPA-PLUS Portable PA Units with Bluetooth® and UHF Order ref: QX12PA+ (178.854UK) QX15PA+ (178.857UK) User Manual VERSION 1.1...
-
Page 2: Package Contents
Caution: Please read this manual carefully before operating Damage caused by misuse is not covered by the warranty Introduction QXPA-plus portable PA units Thank you for choosing the QX series portable PA unit. Please read this manual prior to use to ensure correct operation and avoid damage through misuse. -
Page 3: Risk Of Electric Shock
Safety: Labelling Conventions CAUTION AVIS RISK OF ELECTRIC SHOCK RISQUE DE CHOC ELECTRIQUE DO NOT OPEN NE PAS OUVRIR This symbol indicates that dangerous voltage constituting a risk of electric shock is present within this unit This symbol indicates that there are important operating and maintenance instructions in the literature accompanying this unit. -
Page 4: Charging The Battery
23. IEC mains inlet & fuse holder Connection Your new qtx QXPA-plus unit may arrive with you with the internal battery charged. Before connecting to the mains, switch the unit on and check the POWER LED. If it is green, there is charge in the battery. -
Page 5: External Inputs
Power Up Turn the VOLUME, ECHO, UHF and MIC VOLUME controls down (anti-clockwise) and turn the POWER switch on (the power LED should light). BASS and TREBLE controls should remain pointing vertically (12-o-clock position). Switch the “Talk Over Ctrl” off (i.e. press the button so that it is in the out position) Your QXPA-plus unit should now be ready to operate. -
Page 6: Internal Media Player
Internal media player At the top of the rear panel is the media player section, which can provide playback of recorded material internally or from external sources. Controls for this are shown below. Select player mode between USB, SD, FM tuner or Bluetooth For mp3 media, select between USB or SD/MMC memory device Previous track / FM station Next track / FM station... -
Page 7: Bluetooth Connection
Bluetooth connection To connect a smart phone or tablet to the media player for wireless playback, select Bluetooth mode on the media player, enable Bluetooth on the sending device and scan for available devices. The Bluetooth ID for the media player is “PA SYSTEM”. Select to pair the device and connect with the media player. -
Page 8: Specifications
Specifications Model QX12PA-PLUS QX15PA-PLUS Main driver 300mm (12'') 380mm (15'') Dimensions 565 x 345 x 325mm 675 x 420 x 395mm Weight 12.8kg 18.1kg Power supply 220-240Vac, 50/60Hz (IEC) / external 12Vdc / internal battery HF driver 25mm (1'') Titanium compression driver Wireless mic.
Need help?
Do you have a question about the QX15PA Plus and is the answer not in the manual?
Questions and answers