Related Manuals for Qtx BUSKER-12
Summary of Contents for Qtx BUSKER-12
- Page 1 BUSKER Portable PA Units Order ref: BUSKER-12 (178.866UK) BUSKER-15 (178.868UK) User Manual VERSION 2.0...
-
Page 2: Package Contents
Caution: Please read this manual carefully before operating Damage caused by misuse is not covered by the warranty Introduction Thank you for choosing a Busker portable PA unit. This versatile portable PA unit is packed with features in a compact, manageable enclosure and is suitable for a wide array of applications ranging from public address for presentations to outdoor karaoke. - Page 3 Front Panel VHF microphone indicators VHF Mic A volume VHF Mic B volume USB port LED display SD/MMC card slot USB/SD/FM/Bluetooth volume Media player Mode select Playback Repeat mode select USB/SD memory device select Previous track (hold seek reverse) Play/Pause Next track (hold seek forward) Rear Panel Guitar input volume...
- Page 4 Powering up Your new Busker portable PA unit may arrive with you with the internal battery charged. Before connecting to the mains, turn down all volume controls and switch the unit on (30) and see if the power LED lights (29). If not, you will need to charge the battery before use away from mains power.
-
Page 5: External Inputs
External Inputs In addition to the Busker’s own VHF microphones, two 6.3mm jack inputs (20, 21) are provided to connect external wired or wireless microphones, which are both governed by the WIRED MIC VOL control (16). If required, the music level can be automatically muted when speaking into a microphone by switching in the TALKOVER feature on (25) A further 6.3mm jack input is provided for an electric or electro-acoustic guitar (22) Also, twin RCA and 3.5mm stereo jack input are provided for line input sources such as a CD... -
Page 6: Bluetooth Connection
FM Tuner In FM tuner mode, the station frequency (in MHz) will be displayed. For initial setup, press PLAY/PAUSE to begin the auto-tuning process. The tuner will seek through all frequencies for strong signal reception (i.e. radio stations) ... -
Page 7: Specifications
Specifications Model BUSKER-12 BUSKER-15 Power supply 230Vac, 50Hz (IEC) Output power 100W Frequency response 50Hz - 16kHz 50Hz - 16kHz SPL @ 1W/1m 94dB 96dB Main driver 300mmØ (12“) 380mmØ (15“) Impedance : loudspeaker 4 Ohms HF driver : type... -
Page 8: Troubleshooting
Troubleshooting Check POWER switch is on Check battery is not drained fully No output and no LEDs lit Check mains lead is connected Check mains or D.C. fuse hasn’t blown Check 9V batteries in wireless transmitters Check wireless transmitters are switched on Power LED lit but no VHF Check that handheld transmitters are not switched to MUTE output...
Need help?
Do you have a question about the BUSKER-12 and is the answer not in the manual?
Questions and answers