Page 1
Quick Setup Installation Guide For more detailed information, insert the Installation Disc into the PC and click the User Guide lutton on the Setup Launcher main page. Remove tape and packing materials Remove tapes. (continued on next page)
Page 2
Remove tapes and foam. foam Remove cardloard. Save the packing foam and cardboard! Squeeze latches to open clamshell Lift tals cardloard...
Connect power Do not connect the printer to a PC until prompted to do so during the Printer Driver Installation! Choose display language Language not displayed, press Select For other languages, (Config) press (Select) If Language option is not availalle, see Selecting the Security Level in Chapter One of the User’s Manual.
Page 5
Slowly remove tape from electrical contacts Install and nozzles printhead electrical contacts No less than 45° nozzles (Config) (Select) Wait for printhead latch to le released. Open printhead latch fully. Check that ink is flowing through the tules on loth sides of the printhead. Remove caps.
Page 6
Load sample media Tighten knol fully. Insert media until it stops. Wait for printer to load media. Flat side against media roll.
Page 7
Print test lalel Requires inter-lalel gap or continuous media (Config) (Select) " Top Section: • Lines are defined with no missing nozzles Sample PQ Plot • Lines are printed in order: Yellow, Black, Cyan, Black, Magenta • Vertical dashed lines are straight Middle Section: •...
Page 8
Before installing printer driver, ensure the computer meets minimum system Install printer driver requirements (see System Requirements in the User Manual Appendix). To connect printer to computer using USB To connect printer to network Connect printer to network using Ethernet Network Printer Network...
Need help?
Do you have a question about the L801 and is the answer not in the manual?
Questions and answers