Program 54: Ingredient Program - Panasonic 5000 Series Operating Instructions Manual

MANAGER PROGRAMS

Program 54: Ingredient Program

Program 54 allows you to set up each of the raw ingredients you use within your item
recipes. In it, you assign a number to the ingredient, enter its descriptor, and identify its
cost. Use the following procedure to create or change any of the ingredients you use.
1. With the keylock in MGR Mode, use the next sequence to go into the Ingredient
Program.
5
2. Enter the number of the ingredient you need. Just below the program heading, the
screen displays the numbers you can use. In the example below, numbers 1
through 100 are available.
3. Press CSHR.
[ ingredient # ]
000.000
MARK
Note:
4. To change the current description for this ingredient, place the Alpha overlay on
your keyboard. Press ALPHA SHIFT (Receipt Stop). Type up to 8 characters for
the ingredient name.
5-68
CASH 5
CSHR
The system displays the current assignments for the ingredient number you
entered. In the sample screen above, Ingredient #99 has not yet been
programmed.
4 CASH
13:35 LVL1
** ING#
1 - 100 CSHR
(DSCRPT)
(CODE) SBTL
Panasonic 5000 Version 4.0 Operating Instructions - Rev. 2.0
Ingredient Program
P1
99 **
CASH