Dell Edge Gateway 3003 Installation And Operation Manual page 8

Features
3 Power and System status light
4 WLAN or Bluetooth status light
5 Cloud-connection status light
6 Ethernet port one (with Power
over Ethernet support)
1
7 USB 3.0 port
8 SIM card slot (optional)
9 SD card slot (optional)
10 micro-SIM or micro-SD card
access door
1
USB power is limited to 0.6 A/3 W.
Table 4. Status-light indicators
Function
System
LAN (RJ-45)
8
Indicates the power status and system status.
Indicates if WLAN or Bluetooth is ON or OFF.
Indicates the cloud connection status.
Connect an Ethernet (RJ45) cable to gain network access. Provides data transfer speeds
up to 10/100 Mbps and supports Alternative A of the IEEE 802.3af standard.
NOTE: The Edge Gateway is an IEEE 802.3af Alternative A compliant Powered Device
(PD).
NOTE: To comply with EU Declaration of Conformity (DoC), ensure cable length from
the system to the device does not exceed 30 meters.
NOTE: To comply with regulatory requirements in Brazil, ensure cable length from the
system to the device does not exceed 10 meters.
Connect a USB enabled device. Provides data transfer speeds up to 5 Gbps.
Insert a micro-SIM card into the slot.
Insert a micro-SD card into the slot.
NOTE: Remove the SD card slot filler before inserting a micro-SD card.
Open the access door to access the micro-SIM or micro-SD card.
Indicator
Power status and System
status
WLAN or Bluetooth
Cloud
Link
Color
Green or Amber
Green
Green
Green/Amber
Control
BIOS
Hardware
Software
Driver (LAN)
Status
Off: System off
On (Solid Green): System
on or Boot successful
On (Solid Amber): Power
up or boot fail
Blinking Amber: Fault or
error
Off: WLAN or Bluetooth
module is off
On: WLAN or Bluetooth
module is on
Off: No connection to the
cloud device or service
On: Edge Gateway
connected to a cloud
device or service
Blinking Green: Activity to
a cloud device or service
Off: No network link or
cable is not connected