Panasonic VL-SW274 Quick Manual
Hide thumbs
Also See for VL-SW274:
- Installation manual (17 pages) ,
- Operating instructions manual (40 pages)
Advertisement
Important Information and Quick Guide
Model Name
Wireless Video Intercom System
Main Monitor Station
Thank you for purchasing a Panasonic product.
Please read this document before using the product and save it for future reference.
Carefully read the information found in the section titled "For your safety" in particular.
For further information about features and operations, visit our Web site and find the document:
https://panasonic.net/cns/pcc/support/intercom/sw274
Installation Guide is supplied separately.
This system is an auxiliary system; it is not designed to provide complete protection from property loss. Panasonic will not be
held responsible in the event that property loss occurs while this system is in operation.
1006, Oaza Kadoma, Kadoma-shi, Osaka 571-8501, Japan
http://www.panasonic.com
© Panasonic Corporation 2017
Wireless Video Intercom System
Model No.
Model No.
VL-SW274
VL-MW274
Table of Contents
PNQX8613ZA
VL-SWD501EX
VL-SWD501UEX
2
4
8
11
13
14
16
C0917MM0
Operating Instructions
Advertisement
Table of Contents
Related Manuals for Panasonic VL-SW274
Summary of Contents for Panasonic VL-SW274
-
Page 1: Table Of Contents
Installation Guide is supplied separately. This system is an auxiliary system; it is not designed to provide complete protection from property loss. Panasonic will not be held responsible in the event that property loss occurs while this system is in operation. -
Page 2: Introduction
1.1 Model composition Wireless monitor station Door Station Main Monitor Station (Sub monitor (Doorphone (Main monitor Model composition VL-SW274 VL-MW274 VL-W617 VL-V522L VL-MW274 VL-MW274 *1 Can be configured to be used as an extension monitor. *2 Product names used in this document. - Page 3 1. Introduction Graphical symbols for use on equipment and their descriptions 1. Alternating current (A.C.) 2. Direct current (D.C.) 3. Protective earth 4. Protective bonding earth 5. Functional earth 6. For indoor use only 7. Class P equipment (equipment in which protection against electric shock relies on Double Insulation or Reinforced Insulation) 8.
-
Page 4: Important Information
2. Important information Important information heat resulting in a fire. Do not use damaged 2. Important information 2.1 For your safety AC adaptor, power plug, or power outlets. R Regularly remove any dust, etc., from the AC To prevent severe injury and loss of life/property, adaptor and power plug by unplugging them read this section carefully before using the from the power outlets, then wiping them with a... -
Page 5: Important Safety Instructions
The main monitor, sub monitor, and other compatible Panasonic units use radio waves to communicate with R In areas surrounded by a high electrical field, each other. (The product operates in the frequency disturbances may occur in the unit's image or range of 2.4 GHz and 2.48 GHz with a peak... - Page 6 – The power is turned off during use. exposure of the recorded information. R Panasonic may not be liable for damages due to R Disclaimer external factors such as power failures. Recorded data may be altered or deleted as a result...
- Page 7 For the purpose of recycling to facilitate effective utilization of resources, please return this product to a nearby authorized collection centre, registered dismantler or recycler, or Panasonic service centre when disposing of this product. Please see the Panasonic website for further information on collection centres, etc., or call the toll-...
-
Page 8: Preparation
3. Preparation Preparation 3. Preparation Soft keys 3.1 Controls 3.1.1 Doorphone A Lens cover A Soft key icons, B Soft keys B Camera lens C LED lights Icons indicate the functions that can be operated by the D Call button and soft keys. - Page 9 Indicates that a doorphone and a PBX 3.3 Charging the sub monitor extension are talking. Indicates that the main monitor is Only connect the charger with the supplied Panasonic monitoring. AC adaptor (page 2). Indicates that images are being recorded.
- Page 10 3. Preparation R At the first time of charging or after battery Close the battery cover. replacement, it takes about 7 hours to complete R The battery level is displayed as charging. R If you use the sub monitor while charging, the charging time becomes longer.
-
Page 11: Basic Operations
4. Basic operations Basic operations 4. Basic operations 4.1 Answering doorphone calls 4.4 Recording automatically (recording a received call; main When you receive a call from a doorphone, the main monitor, extension monitor, and sub monitor ring, and monitor and extension monitor display an image from the doorphone. - Page 12 4. Basic operations Sub monitor: Select “Unplayed images” (for new images) or “Played images” (for images that have been 1. Press M N while talking or monitoring. played) → R When the door is opened, is displayed. R The most recent image set of the selected type is displayed.
-
Page 13: Additional Functions
5. Additional functions Additional functions Select the registration number of the extension 5. Additional functions 5.1 Function settings monitor to be registered → Extension monitor: You can change the settings, such as Initial settings, Ringtone settings, and Connected devices settings, to N →... -
Page 14: Vl-V900 Basic Operations
6. VL-V900 basic operations 6. VL-V900 basic operations This section explains the basic operations of the VL-V900 lobby station (Video Intercom System for Apartment Complexes) when used with the VL-MW274 main monitor. https://panasonic.net/cns/pcc/support/intercom/v900 VL-V900 basic operations 6.1 Controls 6.1.1 Lobby station Heat sensor Turns on the display when a visitor is detected. - Page 15 6. VL-V900 basic operations 6.3 Main monitor operations with the lobby station 6.3.1 Image viewing screen of the main monitor Image from lobby station Image from camera Status icons Indicates which lobby station is calling, monitoring, or talking. ("1" indicates the device number.) Indicates which camera is monitoring.
-
Page 16: Other Information
7. Other information Specifications Sub monitor (VL-W617) 7. Other information 7.1 Specifications Main body Power source Ni-MH battery (3.6 V DC / 650 Main monitor (VL-MW274) mAh) Power source 220-240 V AC, 50/60 Hz Dimensions Approx. 157×52×35 Power Standby: 1.9 W (mm) (height ×...