Table of Contents
Advertisement
REPLACEMENT PARTS LIST
For replacement parts, call our customer service department at 1-888-3KOBALT (1-888-356-2258),
8 a.m. - 8 p.m., EST, Monday - Friday.
BB
L
CC
PART
DESCRIPTION
BB
Fastening knob
Bolt
CC
DD
Hex wrench
E
Front/auxiliary handle
H
Guard
L
Spool cover
DD
E
341111437AB
322041444
329011444
341131444
311141444
311091429
Kobalt
is a registered trademark of LF, LLC. All Rights Reserved.
®
19
H
PART #
Printed in China
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the KST 130X-06 and is the answer not in the manual?
Questions and answers
I see nothing about how to refill the line
The document does not provide specific instructions on how to refill the line on a Kobalt KST 130X-06. However, based on general trimmer spool replacement practices, you can follow these steps:
1. Turn Off the Trimmer – Ensure the trimmer is powered off and remove the battery for safety.
2. Remove the Spool Cover – Press the tabs or unscrew the cap holding the spool in place.
3. Take Out the Empty Spool – Carefully remove the old spool.
4. Insert the New Line – If refilling manually, cut a length of 0.080-inch trimmer line (17 feet recommended). Insert one end into the spool’s anchor hole and wind it evenly in the direction indicated on the spool.
5. Reinstall the Spool – Place the refilled or replacement spool back into the trimmer head.
6. Secure the Spool Cover – Snap or screw the cover back into place.
7. Test the Trimmer – Reinsert the battery and test the trimmer to ensure proper feeding of the line.
For exact instructions, refer to the trimmer’s user manual.
This answer is automatically generated
Need schematic or parts for motor at end of shaft
how do I replace the bump knob?