Loopback And Null Interface Configuration Commands; Default; Description - HP 830 Command Reference Manual

Loopback and null interface configuration
commands

default

Use default to restore the default settings for the loopback or null interface.
Syntax
default
Views
Loopback interface view, null interface view
Default command level
2: System level
Usage guidelines
CAUTION:
The default command might interrupt ongoing network services. Make sure you are fully aware of the
impacts of this command when you use it in a live network.
This command might fail to restore the default settings for some commands for reasons such as command
dependencies and system restrictions. Use the display this command in interface view to identify these
commands, and then use their undo forms or follow the command reference to individually restore their
default settings. If your restoration attempt still fails, follow the error message instructions to resolve the
problem.
Examples
# Restore the default settings of interface loopback 0.
<Sysname> system-view
[Sysname] interface loopback 0
[Sysname-loopback0] default
This command will restore the default settings. Continue? [Y/N]:y

description

Use description to change the text description for the current interface.
Use undo description to restore the default description.
Syntax
description text
undo description
23