HP 830 Command Reference Manual page 130

link-aggregation | mac-physic | max-frame-size | power } | med-tlv { all | capability | inventory |
location-id | network-policy | power-over-ethernet } }
Default
A Layer 2 Ethernet port advertises all types of LLDP TLVs, except location identification TLVs.
Views
Layer 2 Ethernet interface view, port group view
Default command level
2: System level
Parameters
all: Enables the interface to advertise the following TLVs:
All basic LLDP TLVs when the all keyword is specified for basic-tlv.
•
All IEEE 802.1 organizationally specific LLDP TLVs when the all keyword is specified for dot1-tlv.
•
All IEEE 802.3 organizationally specific LLDP TLVs when the all keyword is specified for dot3-tlv.
•
All LLDP-MED TLVs except location identification TLVs when the all keyword is specified for med-tlv.
•
basic-tlv: Advertises basic LLDP TLVs.
port-description: Advertises port description TLVs.
system-capability: Advertises system capabilities TLVs.
system-description: Advertises system description TLVs.
system-name: Advertises system name TLVs.
dot1-tlv: Advertises IEEE 802.1 organizationally specific LLDP TLVs.
port-vlan-id: Advertises port VLAN ID TLVs.
protocol-vlan-id [ vlan-id ]: Advertises port and protocol VLAN ID TLVs. The vlan-id argument specifies a
VLAN ID in the TLVs to be advertised, ranges from 1 to 4094, and defaults to the lowest VLAN ID on the
port.
vlan-name [ vlan-id ]: Advertises VLAN name TLVs. The vlan-id argument specifies a VLAN ID in the TLVs
to be advertised, ranges from 1 to 4094, and defaults to the lowest VLAN ID on the port.
dot3-tlv: Advertises IEEE 802.3 organizationally specific LLDP TLVs.
link-aggregation: Advertises link aggregation TLVs.
mac-physic: Advertises MAC/PHY configuration/status TLVs.
max-frame-size: Advertises maximum frame size TLVs.
power: Advertises power via MDI TLVs and power stateful control TLVs.
med-tlv: Advertises LLDP-MED TLVs.
capability: Advertises LLDP-MED capabilities TLVs.
inventory: Advertises the following TLVs: hardware revision, firmware revision, software revision, serial
number, manufacturer name, model name, and asset ID.
location-id: Advertises location identification TLVs.
civic-address: Inserts the normal address information about the network device in location identification
TLVs .
125