Flash Drive Utility (Rhel 6); Vgc-Monitor - Hitachi FLASHMAX2 User Manual

Flash Drive Utility (RHEL 6)

This section describes the utility for the Flash Drive.

vgc-monitor

This is the main command you use to check the status of a Flash Drive.
Executing this command without any parameters, outputs a list of all Flash
Drives installed on the server.
Command:
# vgc-monitor -d < Driver name >
* Use the vgc-monitor command to find out the "x" in "vgcx".
Example: To check the status of the Flash Drive in /dev/vgca
# vgc-monitor -d /dev/vgca
vgc-monitor -d output example
[root@spa05]# vgc-monitor -d /dev/vgca
vgc-monitor x.x(xxxxx.xx)
Driver Uptime:xx:xx
Card Name
vgca
Serial Number
Card Info
3-42
Num Partitions
1
: xxxxxxxx
:Part: SJTxxxxx
Rev: FlashMAX xxxxx,x8 Gen2
Driver and Utility
PCIe Flash Drive FlashMAX2&3 User's Guide
Card Type
HIT-MX-LP-XXXX-XX
Status
Good