Network Settings; Flight Mode - Sharp 703SH User Manual

Network Settings

To Select a Network Automatically
Each time the power is turned on, your phone always tries to connect
to the preferred network.
If your phone is not connected to the network, you can perform the
following immediately to establish the preferred network connection.
→
"Network Settings"
"Connectivity"
→
"Automatic"
To Set the Network Manually
→
"Connectivity" "Network Settings"
→
"Manual"
1.
Select the desired network.
To Add a New Network
→
"Connectivity" "Network Settings"
→
"Add New Network"
If there are no entries, press
If there is an entry, press
1.
Select "Add".
2.
Enter the country code (up to 3 digits).
3.
Enter the network code (up to 3 digits).
4.
Enter a new network name (up to 25 characters).
5.
Select "Select network type".
6.
Select the desired network.
112 Connectivity
(M 10-3)
→
"Select Network"
→
"Select Network"
→
"Select Network"
and go to step 2.
and perform the following steps.
To Edit the Preferred List
→
"Connectivity" "Network Settings"
→
"Set Preferred"
1.
Select the name of the network you wish to edit.
2.
Select "Insert" to insert over the selected position, "Add to
end" to insert at the end or "Delete" to delete.
To Cut the Network Connection
→
"Connectivity" "Network Settings"
1.
Select "On" or "Off".
To Show the Network Information
→
"Connectivity" "Network Settings"
Information"
Information about the operator name, package and services are
displayed.

Flight Mode

(M 10-4)
When the Flight Mode is set to "On", the handset cuts off the network
connections and stops searching for available networks to connect.
→
"Connectivity" "Flight Mode"
1.
Select "On" or "Off".
→
"Select Network"
→
"Flight Mode"
(M 10-3-3)
→
"Network