Acer 700 Series User Manual page 67

will be
(Warning: Clicking the round button above changes the setting and takes effect immediately!)
Select to
Edit
AcerRouter 700 Series User Guide
menu:
Incorrect configuration may cause undesireable behavior. Please refer to the user
All IP packets for this profile
sent discarded except for those matching one or more of the following rules.
Rule Rule
Number Name
1 FTPin
2 HTTPout
3 Manuf
Configuration - IP Filter
Step 1 From the Filtering Configuration screen, select the WAN profile of
interest from the pull down menu. For example, if your only need is to
access the Internet, you should only select the Internet access profile.
Step 2 Select send or discarded as desired, which is equivalent to allow and
disallow, respectively.
Step 3
If you are just starting, click Add to add a new selection rule. If you have
previously defined rules, you will see those rules shown as entries in the
rule table, and you can edit the rule by first highlighting the desired entry
in the rule table followed by clicking the Edit button.
Step 4
In case of adding a new selection rule, the following screen shows:
Filtering Configuration
manual for more details
Local IP
Address(es)
192.168.168.22 21
Any 80
192.168.168.110- Any
192.168.168.134
Delete
Add
ISP
Local Remote IP
Port(s) Address(es)
Any
Any
Any
Edit
Remote
Port(s)
Any
Any
Any
6-7