Acer 700 Series User Manual page 30

3-10
Note:
The SMART Configuration screen displays the very first time you run the S
MART software. To return to this screen, select Customize User Interface from the
menu
Step 2 The Internet Access Configuration ISDN screen appears. If you have
already configured your ISDN interface, skip to Step 8.
Internet Access Configuration
ISDN Switch Type
Directory Phone Number 1
Directory Phone Number 2
Remote Phone Number Remote Phone Number
My System Name
My System Password
APPLY and TEST
Please refer to Chapter 3 for details on how to configure this screen and
what you can do after clicking APPLY and TEST.
Step 3
Alternatively, you can click ADVANCED for more options, which cause
the next screen to show.
Internet Access Configuration
ISDN Link Usage
STAC Compression
Idle Timeout (0-3600 seconds)
Step 4
Set the following parameters:
ISDN Link Usage: This determines how the AcerRouter 700 utilizes the
two B channels for your Internet connection. Available options are:
- One B Channel Only: The 700 will only use one B channel - leaving the
other B channel for other use.
- Two B Channels Only When Needed: The 700 will initiate a conne
ction with one B channel, and bring up the other B channel only if the
traffic increases to a point when more bandwidth is needed.
- Always two B Channels: The 700 will always establish both B channels
to access the Internet.
Note:
Link Usage options do not appear if the ISDN switch type your selected
is Permanent 64K or Permanent 128K. Availability of multiple B channels de
pends on your subscription options with your ISP. Using an additional B channel
may mean additional cost (both from your ISP and the phone company).
ISDN
Auto-detect (North America only)
ADVANCED
ISDN
Two "B" Channels only when needed
Yes No
120
CANCEL OK
AcerRouter 700 Series User Guide